Subscribe to Our Youtube Channel
Related Manuals for AirLive EPHONE-2000S
Summary of Contents for AirLive EPHONE-2000S
- Page 1 Wired IP Phone User’s Manual AirLive ePhone-2000S English Version...
-
Page 2: Table Of Contents
AirLive ePhone-2000S <English Version> CONTENTS Airlive ePhone-2000S Diagram....................1 Front View ..........................1 Rear View ........................... 1 Back View ........................... 1 Key Definition........................... 2 III. Basic Configuration ......................... 4 How to activate Main Menu ?.................... 4 『 』 Network Settings ........................4 DHCP .......................... - Page 3 Option-2 Activate STUN ......................16 To determine whether you are currently NATed or behind a firewall......17 Activate STUN Mode ....................17 VIII. Specify CODEC........................17 Advanced Call Processing ..................... 18 Mute ............................18 Hold and Retrieve ........................18 AirLive ePhone-2000S -iii- English Version...
- Page 4 Auto Answer ..........................21 (1) Server-side invoked auto-answer for urgent calls: ..............21 (2) Phone-set locally configured to auto-answer all incoming calls unconditionally....21 (3) Auto-Answer incoming calls arrive on specific registered SIP address-of-records....22 AirLive ePhone-2000S -iv- English Version...
-
Page 5: Airlive Ephone-2000S
Airlive ePhone-2000S Diagram 1. Front View 2x16 LCD Speaker Keypad Handset Microphone 2. Rear View Power jack 10/100 RJ-45 Ethernet Port (to PC) Reset 10/100 RJ-45 Ethernet Port (to LAN) 3. Back View Ear-phone Jack Wall Mount (RJ-11) Handset Jack... -
Page 6: Key Definition
【Flash】 ：Take back transferring calls/Exit Conference mode 【XFER】 ：Transfer 【＋】 ：Volume UP (Ringer, headset, handset, speaker) | Next item Move cursor to right 、 【－】 ：Volume Down (Ringer, headset, handset, speaker) | Previous item Move cursor to left 、 AirLive ePhone-2000S English Version... - Page 7 【Address Book】 ：Access to address book (search an entry or list all entries). 【Call History】 ：Missed calls/Received calls/Dialed Number. If the red LED is flashing, it indicates there are unread records of missed calls. 【Conference】 ：3-party local conferencing Registration Auto-redial Address Book Call History Forward Conference AirLive ePhone-2000S English Version...
-
Page 8: Basic Configuration
3. Gateway IP = 210.201.210.128* Enable【4.Use Static DNS】by choosing 【1.Static DNS】 Assign【5.Static DNS】, such as: “1.Primary DNS = 168.95.1.1*” (3) PPPoE Pick【1.Mode】/【1.DHCP】 Go to 【3.PPPoE Settings】 and enter your PPPoE authentication information, such as: Login ID = MyPPPoEAccount* AirLive ePhone-2000S English Version... -
Page 9: Sip Service
SIP Proxy/Registrar Server: sip.SIP.com, which serves on UDP port 5060 Point web browser to your terminal and enter the following information on 『2.SIP Settings』/『1 Domain』page. Alternatively, you may configure it via either keypad or TELNET by going to『Main AirLive ePhone-2000S English Version... - Page 10 LED is off: Users explicitly logs out all SIP service and goes off-line ‘till user presses the 【Registration】key again to go on-line (re-register to all SIP service). Or press【Service Realm】to show registration status of each active service domain: AirLive ePhone-2000S English Version...
-
Page 11: Phone Calls
2. Dialing Method In dialing phase, you could use【MUTE】to correct typos. (1) Address book 『Main Menu』 => 『1.Address Book』 / 『1.Search』 (By default 【F4】 is programmed to access address book). Pick the target number and press【REDIAL】to dial out. AirLive ePhone-2000S English Version... -
Page 12: Call History
Dial the last suffix of target IP (the number must be between 1 and 255, inclusive). Use 【**】for “ ” if the target SIP agent does not listen on UDP port 5060. E.g., if “192.168.10.200” wants to dial “192.168.10.31”, please dial 【*31#】 or AirLive ePhone-2000S English Version... -
Page 13: Add, Search, Delete And Modify Address Book
Choose 『1.Modify』 from the menu of this address and modify it 4. Speed Dial You may point web browser to your terminal’s IP and go to 『Address Book』/『Speed Dials』 to configure it. Below illustrates how to configure speed dials by keypad or TELNET. AirLive ePhone-2000S English Version... -
Page 14: Add Speed Dial Number
Pick 『3.Revoke』and press 【HOLD】to remove it from the screened list. Call Forward You may point web browser to your terminal’s IP and go to 『Call Forward』to configure it. Below illustrates how to configure call forward by keypad or TELNET. AirLive ePhone-2000S -10- English Version... -
Page 15: Set Up Forwarding Number
2 calls are waiting). If you have not configured such forwarding number, it will reply the peer as busy and recorded as a missed call. No Answer Forward 『Main Menu』 => 『4.Call Forward』 / 『4.No Answer Fwd』 / 『1.Status』 and AirLive ePhone-2000S -11- English Version... -
Page 16: Do Not Disturb (Dnd)
When this feature is on, all incoming calls will be silently (no ringing tone will ever be heard) forwarded to the forwarding number you previously configured. If you have not configured the forwarding number, the peer will be replied as ”480 Temporarily unavailable” and recorded as a missed call. AirLive ePhone-2000S -12- English Version... -
Page 17: Phone Settings
: Messaging – Access to out-of-dialog instant messaging. 【 】 【F6】: Network Speed - adjust the voice quality based on network link speed. 【F7】: Network Info - show the current active host IP, MAC address and DNS IP(s). AirLive ePhone-2000S -13- English Version... -
Page 18: Date/Time
“NAT Traversal” on “IP SIP Phone v2 User’s Guide” for detail, and below illustrates how to configure your terminal by keypad or TELNET. 1. To determine whether you resides on public internet or local area network 『Main Menu』=>『8.Advanced』/『4.System status』 or press 【F7】(default is AirLive ePhone-2000S -14- English Version... -
Page 19: Public Internet Configuration
DHCP as your network configuration. Otherwise you take the risk that the IP SIP Phone would get a different IP from the currently set into the mapping when it reboot and re-get its IP by DHCP. AirLive ePhone-2000S -15- English Version... -
Page 20: Option-2 Activate Stun
For these environments, "Simple Traversal of UDP Through NATs" (STUN) has come to rescue. To enable STUN, you must acquire the IP of your served STUN server and diagnose your NAT to see if STUN is viable. AirLive ePhone-2000S -16- English Version... -
Page 21: To Determine Whether You Are Currently Nated Or Behind A Firewall
CODECs come with lower bit-rates such that it will use the most preferred CODEC on making/taking calls. To set up personal CODEC preference by keypad or TELNET: 『Main Menu』=>『8.Advanced』/『1.CODEC』/『1.Preferences』 Reorder the CODEC precedence： 0: Disable the selected CODEC 1: Highest priority 8: Lowest priority AirLive ePhone-2000S -17- English Version... -
Page 22: Advanced Call Processing
To switch to loud-speaker phone (open-listening), you should turn the speaker on while keeping handset lifted (off-hooked). Then you can continue talking by handset while all by-listeners in the same room could hear your conversation from the speaker. This is to AirLive ePhone-2000S -18- English Version... -
Page 23: Transfer
(Transfer the call without asking the transferring target first.) Set up a connected call to party-A Press【XFER】to put A on hold and gain dial-tone. Dial the target number of party-B without an ending 【#】; instead, you SHOULD press AirLive ePhone-2000S -19- English Version... -
Page 24: Conference
Once the conference call initiator disconnects, the calls are terminated between all parties. To disconnect a specific party in a three-way local conference, you may ask the party to whom you want to disconnect to hang up first. Alternatively, you may press 【FLASH】 AirLive ePhone-2000S -20- English Version... -
Page 25: Auto Answer
If you have mapped one of your DSS keys to “Auto- auto-answer mode. Once enabled, the corresponding red LED of mapped DSS key will be on, and the phone will auto-answer all incoming calls arrive on idle mode. Besides, AirLive ePhone-2000S -21- English Version... -
Page 26: Auto-Answer Incoming Calls Arrive On Specific Registered Sip Address-Of-Records
Check for the global switch for auto-answer feature. c. Match this call against all enabled service domains for auto-answering feature, if a match is located, auto-answer it. iv. Otherwise, proceed as normal incoming calls. AirLive ePhone-2000S -22- English Version...
Need help?
Do you have a question about the EPHONE-2000S and is the answer not in the manual?
Questions and answers