Olympus E-PL1 User Manual page 6

lens properly before mounting the lens to the camera.
For 14-42mm Lens the Zoom Gear Ring should be installed first to cover up 1/3 of the zoom ring
on the lens. Then the Focus Gear Ring follows and should be installed to cover the focus ring on
the lens as illustrated on the above photo.
4.6 Mounting the camera in the housing:
Slide the hot shoe plug into the hot shoe
Install the camera and store the hot shoe plug cable as illustrated below.
Replace the lid and make sure the lever is perpendicular to the side wall of the housing. Lock the
lid by press down the lever and turn until the lever is parallel to the side wall of the housing.
6