1. Manuals
  2. Brands
  3. AirLive Manuals
  4. Digital Camera
  5. WL-1000CAM
  6. User manual

AirLive WL-1000CAM User Manual

Wireless-g motion jpeg camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

WL-1000CAM
Wireless-G Motion JPEG
Camera
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WL-1000CAM and is the answer not in the manual?

Questions and answers

Summary of Contents for AirLive WL-1000CAM

  • Page 1 WL-1000CAM Wireless-G Motion JPEG Camera User’s Manual...

  • Page 2: Declaration Of Conformity

    OvisLink Corp. 5F., NO.6, Lane 130, Min-Chuan Rd., Hsin-Tien City, Taipei County, Taiwan Declare that the product Wireless-G Motion JPEG Camera AirLive WL-1000CAM is in conformity with In accordance with 89/336 EEC-EMC Directive and 1999/5 EC-R & TTE Directive Clause Description Electromagnetic compatibility and Radio spectrum Matters (ERM);...
  • Page 3 1999/5/CE. muiden ehtojen mukainen Ar šo OvisLink Corp. deklarē, ka AirLive WL- Hér með lýsir OvisLink Corp yfir því að AirLive WL- Latviski [Latvian] 1000CAM atbilst Direktīvas 1999/5/EK Íslenska [Icelandic] 1000CAM er í...
  • Page 4 Further, this company reserves the right to revise this publication and to make changes from time to time in the contents thereof without obligation to notify any person of such revision or changes. AirLive WL-1000CAM User’s Manual...

  • Page 5: Table Of Contents

    ................... 36 ONTROL UTTONS 5-5 V .................... 37 IDEO ECORDING 5-6 C ..................38 HANGE ESOLUTION 5-7 V ............. 39 AMERAS IMULTANEOUSLY 5-8 V ................... 40 IEWER TILITY ETTING 5-8-1 Setting ...................... 40 5-8-2 Recording ....................41 AirLive WL-1000CAM User’s Manual...
  • Page 6 ETECTION ETTINGS 6-5 S ..................... 62 YSTEM ETTINGS 6-6 S ....................64 TATUS ETTINGS 6-7 U ....................64 SERS ETTINGS 6-8 L ....................66 ETTING CHAPTER 7: FREQUENTLY ASKED QUESTIONS..............67 CHAPTER 8: TECHNICAL SPECIFICATIONS................. 68 AirLive WL-1000CAM User’s Manual...

  • Page 7: Chapter 1: Product Information

    CPU: Intel Pentium III 750MHz above or Intel Celeron 1GHz above  Memory Size: 128MB (256MB recommended)  DirectX 9.0 or above  VGA card with fully DirectX 9.0 supported.  VGA Card Resolution: 800 x 600 or above AirLive WL-1000CAM User’s Manual...

  • Page 8: Chapter 2: Hardware Installation

    When the Internet Camera is linking to wireless network, the LED is lighting. The LED is flashing when video is transmitted or received through wireless network. Wireless SMA Connector (Wireless Model Only) Focus Ring LED Green: LAN Activity LED Amber: WLAN Activity LED Blue: Power On AirLive WL-1000CAM User’s Manual...

  • Page 9: Camera Ports

    5 seconds and the Internet Camera will reset itself to the factory default settings (warning: your original configurations will be replaced with the factory default settings). 改圖 Power Jack Reset Button LAN Port AirLive WL-1000CAM User’s Manual...

  • Page 10: Installation Procedure

    4. Make sure that you have installed correct VGA driver and DirectX 9.0 or above. Note: It is highly recommended to use the power adapter shipped with the Internet Camera, do NOT use any other power adapter from any sources. AirLive WL-1000CAM User’s Manual...

  • Page 11: Chapter 3: Software Installation

    2. The Install Wizard will show six selections, select the program you want to install or click ―Exit‖ to install the program later. The following installation steps are the demonstration of ―Install Administrator Utility & Camera Viewer‖. AirLive WL-1000CAM User’s Manual...
  • Page 12 3. The system will start the installation procedures. Click ―Next‖ to continue installation. 4. If you wish to install the software program in an alternate location, click ―Change‖; otherwise click ―Next‖ to move on to the next step. AirLive WL-1000CAM User’s Manual...
  • Page 13 5. Click ―Install‖ to start installing the program. 6. The system will install the program automatically. AirLive WL-1000CAM User’s Manual...
  • Page 14 8. ‖Administrator Utility―will be run automatically after installation. On the Internet Camera first page, the cameras found in the network are listed in the left window. Choose the one you want to configure and click ―Setting Wizard‖ to proceed. ―N‖ means the camera is new and not configured. AirLive WL-1000CAM User’s Manual...
  • Page 15 9. Please enter the default password ―airlive‖ and click ―OK‖ to login to the IP setup page. 10. Internet Camera is working through the network (TCP/IP Protocol). The IP address and subnet mask setting must be correct, or you cannot access to the camera. The wizard program will detect the IP address status of your network automatically and suggest a free IP address for the Camera.
  • Page 16 12. The ―Camera Viewer‖ will show the video automatically. Congratulations, you can use the camera through the network to view the video from now on. AirLive WL-1000CAM User’s Manual...

  • Page 17: Chapter 4: Using The Administrator Utility

    2. Double click the ―IP Camera Admin‖ icon to run the utility. Once the utility is started, it will search all the cameras within the network. To do more settings, please refer to the description in the following sections. AirLive WL-1000CAM User’s Manual...

  • Page 18: General Setting

    Camera Setting Click ―Detail Setting‖ to do more setting of the camera such as IP Detail Setting address, Resolution, password and firmware upgrade, etc. Click ―Setting Wizard‖ to setup the necessary setting for the Setting Wizard camera. AirLive WL-1000CAM User’s Manual...

  • Page 19: Detail Setting

    When you click the ―Detail Setting‖, a screen will pop up for you to enter the ―Administrator Name‖ and ―Password‖. The default value is as follows. Name: ―Admin‖ Password: ―airlive‖ If the name and password you enter are correct, you can start to setup the camera. AirLive WL-1000CAM User’s Manual...

  • Page 20: Network Setting

    AIRLIVE 192 . 168. 192 . 168. Network Setting The default camera name is ―WL-1000CAM‖. It is recommended to Internet Camera Name name a meaningful name for the camera. IP Address Enter an unused IP Address within the IP address range used on your LAN.

  • Page 21: Wireless Settings (*Wireless Model Only)

    If you change the web port from 80 to 8080, you must type http://192.168.2.3:8080 to connect the camera through the web browser. 4-2-2 Wireless Settings (*Wireless Model Only) airlive Utility will site survey automatically or you can press ―Refresh‖ button to survey the AP router manually. AirLive WL-1000CAM User’s Manual...
  • Page 22 After site survey procedure, there will show existing AP SSID. airlive Then press ―Connect‖ to connect AP router or press ―Add to Profile‖ to configure the Wireless WEP and WPA encryption. airlive AirLive WL-1000CAM User’s Manual...
  • Page 23 There are WEP(Open System/Shared Key) ,WPA-PSK,WPA2-PSK and WPANone encryption settings. You can choose one to match AP router wireless settings. After set the profile, Please remove the LAN cable then IP Camera will connect to AP router automatically. AirLive WL-1000CAM User’s Manual...

  • Page 24: E-Mail Setting

    Wired Setting Environment Wireless Setting Environment You must configure the wireless settings from wired environment. Then you can remove the wired cable and start wireless connection. 4-2-3 E-Mail Setting AirLive WL-1000CAM User’s Manual...

  • Page 25: Pppoe Settings

    When Authentication is enabled, input the password. Send a Test Email Press this button to send a test e-mail to your mailbox. You can use this function to test if your setting is correct. 4-2-4 PPPoE Settings AirLive WL-1000CAM User’s Manual...

  • Page 26: Ftp Settings

    Internet. 4-2-5 FTP Settings FTP Settings This camera supports ―Motion Detection‖ functions. When Motion FTP Server Detection event occurred, you can record the pictures to FTP server. Enter the FTP address for receiving the pictures. AirLive WL-1000CAM User’s Manual...

  • Page 27: Date / Time Settings

    If your Camera is under NAT, you usually need to enable this feature. 4-2-6 Date / Time Settings Date / Time Settings Set Date/Time manually Set the current Date and Time. NTP Server Synchronize the Date and Time with NTP server. AirLive WL-1000CAM User’s Manual...

  • Page 28: Resolution

    Specify the IP Address of the NTP Server. 4-2-7 Resolution Resolution Resolution Select the desired video resolution format. Larger resolution requires more bandwidth. 640 x 480 is ―VGA‖ format. 320 x 240 is ―CIF‖ format. 176 x 144 is ―QCIF‖ format. AirLive WL-1000CAM User’s Manual...

  • Page 29: Advanced Setting

    DDNS is designed to solve this problem, by allowing users to connect to your LAN using a domain name, rather than an IP address. Enable/Disable Enable or disable DDNS function of the camera. AirLive WL-1000CAM User’s Manual...

  • Page 30: Users

    Account Enter the login name for the DDNS service. Password Enter the password for the DDNS service. 4-2-9 Users Users Administrator Setting the password of Administrator account Current Password Enter the current password of the camera. AirLive WL-1000CAM User’s Manual...

  • Page 31: Tools

    Setting the user account and password. Your camera can support 4 user account. 4-2-10 Tools Tools Firmware Version Display current firmware version. Firmware Update You can upgrade camera’s firmware via this function. Press this button and select the correct firmware to upgrade. AirLive WL-1000CAM User’s Manual...

  • Page 32: About

    Camera Name: ―WL-1000CAM‖ IP Address: ―192.168.2.3‖ Subnet Mask: 255.255.255.0 Administrator Name: ―Admin‖ Password: ―airlive‖ Video Port: ―4321‖ Web Port: ―80‖ 4-2-11 About About Administrator Utility Version Display current Administrator Utility Version. AirLive WL-1000CAM User’s Manual...

  • Page 33: Setting Wizard

    AIRLIVE 192 . 168. 192 . 168. Setting Wizard The default camera name is ―WL-1000CAM‖. It is recommended to enter a Internet Camera Name meaningful name for the camera. IP Address The wizard will auto setup an available IP Address to the camera. For example: if the IP address of the network is 192.168.2.x, the wizard will...
  • Page 34 Click ―Cancel‖ to stop wizard setting. Cancel Click ―Finish‖ to complete the camera setting. Finish When you finish the camera setting, you can click ―Ok‖ to run the ―Camera Viewer‖ immediately or click ―Cancel‖ to run the ―Camera Viewer‖ later. AirLive WL-1000CAM User’s Manual...

  • Page 35: Chapter 5: Using The Camera Viewer

    3. Click ―Setting Wizard‖ from Administrator Utility and follow the instructions in the utility. 5-1 Panel Introduction In the beginning when you start the Camera Viewer, you would see a Control Panel and a four division Viewer window. AirLive WL-1000CAM User’s Manual...

  • Page 36: Camera Buttons

    ―Configure Camera x‖. 5-3 Camera Status There is a status bar shown different color to indicate the status of each Internet Camera. Camera Status It means that there is no camera set to connect. YELLOW AirLive WL-1000CAM User’s Manual...

  • Page 37: Control Buttons

    The ―Pause‖ button provides you a way to pause the current video Pause display. When the displaying video is paused, click on the ―Play‖ again to resume the video display. The ―Forward‖ button to forward the speed of display when playback the Forward AirLive WL-1000CAM User’s Manual...

  • Page 38: Video Recording

    You can assign a schedule and let this viewer automatically recording the video stream. Please refer to Section 7.8 to see how to setup schedule for the recording. The file name of the recorded video file is the start time of recording. For example, the file name ―IPCamera_2004-10-8-23-56-40.avi‖ means it AirLive WL-1000CAM User’s Manual...

  • Page 39: Change Resolution

    Note: Before changing the resolution of the Internet Camera, you have to select the Internet Camera by clicking the camera button first. If you change the resolution of an Internet Camera, other clients who are viewing the same Internet Camera simultaneously will also see the video with the changed resolution, too. AirLive WL-1000CAM User’s Manual...

  • Page 40: View Four Cameras Simultaneously

    Resolution Change the resolution to 640x480 (VGA) mode. QVGA Change the resolution to 320x240 (QVGA) mode. 5-7 View Four Cameras Simultaneously Click the four division button can view the 4 cameras simultaneously in a four-division window. AirLive WL-1000CAM User’s Manual...

  • Page 41: Viewer Utility Setting

    , then the setting window of the Internet Camera will pop up. Note: When you want to change the settings such as IP Address, Video Port, etc. in the ―Setting‖ option, you must disconnect the Internet Camera first by clicking the ―Stop‖. 5-8-1 Setting AirLive WL-1000CAM User’s Manual...

  • Page 42: Recording

    1. The utility will only start to record the video stream when this utility is running and is successfully connecting to the Internet camera in the beginning of the schedule. 2. The schedule setting of one-time or weekly schedule should not overlap, or the recording will fail. AirLive WL-1000CAM User’s Manual...
  • Page 43 One-Time Schedule AirLive WL-1000CAM User’s Manual...
  • Page 44 Click ―New‖ to add a new recording schedule. Select an existing schedule in the schedule list and click ―Edit‖ to edit Edit the schedule. Select an existing schedule in the schedule list and click ―Delete‖ to Delete delete the schedule. AirLive WL-1000CAM User’s Manual...

  • Page 45: Status

    The elapsed time of the current connection session between the utility and the Internet Camera. Video Received The total size (Unit is KByte) of video stream received during the current connection session between the utility and the Internet Camera. AirLive WL-1000CAM User’s Manual...

  • Page 46: General

    The total number of video frames received during the current connection session between the utility and the Internet Camera. Number of Users The total number of users that viewing this camera currently. 5-8-4 General You can manage storage usage for this Internet Camera here. General AirLive WL-1000CAM User’s Manual...
  • Page 47 The current used disk space for saving the recording file. Max Video File Size This let you assign a maximum size of each video file. The upper bound of this value is 2 GB per file. AirLive WL-1000CAM User’s Manual...

  • Page 48: About

    5-8-5 About About Camera Viewer Utility Version Display current Camera Viewer Utility Version. AirLive WL-1000CAM User’s Manual...

  • Page 49: Playback

    5-9 Playback Click the ―Open File‖ and a ―Load File‖ window will be popped up. Select the file that you want to play. The viewer will start to play the selected video file. AirLive WL-1000CAM User’s Manual...

  • Page 50: Rotate Video

    5-10 Rotate Video Rotate function lets you rotate the video frame 180 of degree angle each time you click the ―Rotate‖ . With this function, you can view the live video with normal, and 180 degree angles counterclockwise. AirLive WL-1000CAM User’s Manual...
  • Page 51 AirLive WL-1000CAM User’s Manual...

  • Page 52: Chapter 6: Web Connection And Setup

    When the camera is connected, the browser will take you to the live video page. If you are viewing this camera at first time, the following dialog will appear to install the ActiveX plug in. Please check the publisher part, you should only accept it if it is published by AirLive Ovislink Crop. AirLive WL-1000CAM User’s Manual...
  • Page 53 System – Setup System utilities and settings in this menu. Status – Shows the camera information and current status in this page. Users – This camera support up to 4 user accounts. You can setup them in this menu. Log- System Log AirLive WL-1000CAM User’s Manual...

  • Page 54: Camera Setting

    Adjust this property to control the video quality Max Frame Rate Set the video max frame rate. This camera can support at most 30 frames per second. Set the frame rate higher can get video more smooth. But will use more bandwidth. AirLive WL-1000CAM User’s Manual...
  • Page 55 You can enable or disable ―Time Stamp‖ function in this item. Enable OSD When you disable ―OSD‖ function, the ―Time Stamp‖ will be hidden. When you finish ―AV Server‖ setting, click this button to validate Apply the setting values. AirLive WL-1000CAM User’s Manual...

  • Page 56: Lan Setting

    Enter an unused IP Address within the IP address range used on your LAN. If the IP Address of your LAN is from the 192.168.2.0 to 192.168.2.250, you can set an unused IP Address from the range for the camera, for example: 192.168.2.250. AirLive WL-1000CAM User’s Manual...
  • Page 57 A maximum transmission unit (MTU) is the largest size packet or frame, specified in octets (eight-bit bytes), that can be sent in a packet or frame based network such as the Internet. When you finish the ―PPPoE‖ setting, click ―Apply‖. APPLY AirLive WL-1000CAM User’s Manual...
  • Page 58 Internet Explorer. The format is like: IP Camera will send a snapshot image to Internet Explorer. If user changed file name (Ex: ―1234‖), the URL must be changed to ―http://192.168.2.3/1234.jpg‖ When you finish the ―UPnP‖ setting, click ―Apply‖. APPLY AirLive WL-1000CAM User’s Manual...

  • Page 59: Wlan Setting

    6-3 WLAN Setting AirLive WL-1000CAM User’s Manual...
  • Page 60 ―Open System‖ means that you can use WEP for encryption or not to encryption. When you select ―Shared Key‖, you must use WEP for encryption. The last option is ―WPA-PSK‖. When you select this authentication type, you can encryption your wireless AirLive WL-1000CAM User’s Manual...
  • Page 61 128-bit – Input 26-digit Hex values (in the ―A-F‖, ―a-f‖ and ―0-9‖ range) or 13-digit ASCII characters (including ―a-z‖ and ―0-9‖) as the encryption keys. For example: ―01234567890123456789abcdef― or ―administrator‖. When you finish ―WLAN‖ setting, click this button to validate the Apply setting values. AirLive WL-1000CAM User’s Manual...

  • Page 62: Motion Detection Settings

    Enable or Disable the Motion Detection Function. Next Event Detected Setup the interval between two events. For example, if you setup Interval the interval to 5 seconds, the next event will start after this event finished + 5 seconds. AirLive WL-1000CAM User’s Manual...

  • Page 63: System Settings

    ―E-Mail & FTP‖ menu. 6-5 System Settings The ―System‖ allows users to setup the camera’s parameters, like camera name, data/time setting. And also provide firmware upgrade and reset tools at this page. AirLive WL-1000CAM User’s Manual...
  • Page 64 There are four LEDs to indicate the status of Internet Camera. If you wan to secure the camera from noticing, you can turn off the LED light by clicking ―LED Light OFF‖. To turn on the LED light, click ―LED Light ON‖. AirLive WL-1000CAM User’s Manual...

  • Page 65: Status Settings

    192.168.2.3 6-7 Users Settings The ―Users‖ allows users to add four user accounts which are able to view video from Camera Viewer and Web Management. These users, unlike Administrator, are not allowed to configure the camera. AirLive WL-1000CAM User’s Manual...
  • Page 66 Enter the the login name to the camera. LOGIN Enter up to 4 digits password for the new user account. PASSWORD Enter the password again to confirm the setting. CONFIRM PASSWORD Click ―Apply‖ to save the user account setting. APPLY AirLive WL-1000CAM User’s Manual...

  • Page 67: Log Setting

    The screen will show event and event time of device. LOG SCREEN You can press ―Refresh‖ button to refresh the log screen. REFRESH AirLive WL-1000CAM User’s Manual...

  • Page 68: Chapter 7: Frequently Asked Questions

    A: Yes, the Internet Camera can be connected to a LAN with private IP Addresses. Q7: The focus on the Internet Camera is bad, how can I correct it? A: Adjust the Internet Camera focus manually. AirLive WL-1000CAM User’s Manual...

  • Page 69: Chapter 8: Technical Specifications

    View multiple cameras simultaneously - Up to 4 cameras at a time Manual/Schedule Record, Video Playback/Stop/Forward/Pause Supports four additional user accounts for viewing camera Auto sending Snap Shot by E-mail or FTP Support DDNS and UPnP functions Supports Windows 2000/XP/2003 Firmware Upgradeable AirLive WL-1000CAM User’s Manual...

Table of Contents