Technical Data; Pc Requirements - Philips GoGEAR SA4DOT02 User Manual

7 Technical data

Power
• Power supply: 110 mAh Li-ion polymer
internal rechargeable battery
• Play time¹
Audio (.mp3): up to 6 hours
• Fast charging: 6-minute charging for
60-minute play
Software
Philips Device Manager: To update the
•
firmware and recover the player
Connectivity
• Headphone 3.5 mm
• USB 2.0 High speed
Sound
• Channel separation: 45 dB
• Frequency Response: 20-18,000 Hz
• Output power: 2 x 2.4 mW
• Signal to noise ratio: > 84 dB
Audio playback
Supported formats:
• MP3
Bitrate: 8-320 kbps and VBR
Sampling rates: 8, 11.025, 16, 22.050,
32, 44.1, 48 kHz
• WMA (unprotected)
Bitrate: 5-320 kbps
Sampling rates: 8, 11.025, 16, 22.050,
32, 44.1, 48 kHz
• WAV
Storage media
Built-in memory capacity²:
• SA4DOT02 2 GB NAND Flash
• SA4DOT04 4 GB NAND Flash
• SA4DOT08 8 GB NAND Flash
Media transfer³
• Windows Explorer (drag and drop)
12 EN
Note
•
Specifications are subject to change without notice.
•
¹ Rechargeable batteries have a limited number of
charge cycles. Battery life and number of charge cycles
vary by use and settings.
•
² 1 GB = 1 billion bytes; available storage capacity is
less. Full memory capacity may not be available as some
memory is reserved for the player. Storage capacity
is based on 4 minutes per song and 128-kbps MP3
encoding.
•
³ Transfer speed depends on operating system and
software configuration.

PC requirements

• Windows® XP (SP3 or above) / Vista / 7
• Pentium III 800 MHz processor or higher
• 512 MB RAM
• 500 MB hard disk space
• Internet connection
• Windows® Internet Explorer 6.0 or later
• CD-ROM drive
• USB port