Mobility Sound BTD-Mobile User Manual

BTD-Mobile Bluetooth Adapter
BLUETOOTH ADAPTER USER'S GUIDE
For Compatible Wireless Audio Accessories
The Mobility Sound Bluetooth Adapter BTD-Mobile
allows you to use a compatible wireless headset or
other audio accessory with your two-way radio.
Bluetooth Adapter
Model No.: BTD-Mobile
Made in Taiwan
FCC ID: XTS-BTD-1M3
QUICK START
1. Connect the Mobility Sound Bluetooth adapter (BTD-Mobile) to a compatible
two-way radio.
2. Pair the Bluetooth adapter with a compatible wireless audio accessory.
3. Connect a BT-PTT accessory (optional).
4. Test and use.
Connecting the Ad a p ter to Radio
STEP ONE: Connecting to Two-Way Radio
To connect your Bluetooth adapter to a two-way radio, follow these steps:
* Always turn off your two-way radio before connecting the Bluetooth adapter.
* Plug the Bluetooth Adapter BT-Adapter into the speaker-microphone / audio
accessory jack of your two-way radio.
* On some models of two-way radio, you may need to tighten a retaining screw to
ensure that the Bluetooth adapter remains attached to the radio
* Turn on your two-way radio and verify that the radio transmits and receives with
the adapter attached.
* Because no wireless audio accessory will yet be paired to the Bluetooth adapter,
received signals should be heard over the radio's internal speaker and transmitted
signals will be sent using the radio's internal microphone.
* The Talk button on the Bluetooth adapter will not function as a Push-to-Talk
button for your two-way radio until a wireless audio accessory is successfully
paired to the adapter.
Version 1.0 October 2010
3
Controls and Connection
PTT
Used to place the Bluetooth Adapter in
pairing mode. The LED flashes messages
that let the user know the current status of
the Bluetooth Adapter. Once paired with an
audio accessory, this switch is used to
activate the Push-To-Talk function of the
two-way radio.
Pairing With an Audio Accessory
STEP TWO: Pairing with an Audio Accessory
* Turn off the radio that the Bluetooth adapter is connected to. Wait at least three
seconds.
* Turn the radio on while holding down the Talk button on the Bluetooth adapter.
* Continue to hold the Talk button down for approximately three seconds.
Release the Talk button when the status LED begins to flash two times per second.
* The Bluetooth adapter is now in audio accessory pairing mode. Activate the
pairing mode on your compatible wireless audio accessory.
* Once the wireless audio accessory and Bluetooth adapter are paired with each
other, the status LED on the adapter will show a constant blue light for three
seconds.
* If the Bluetooth adapter does not detect a compatible wireless accessory within 60
seconds of being put into pairing mode, the adapter will exit the pairing mode and
resume normal operation.
* Once successfully paired, you will be able to operate your two-way radio using
your compatible wireless accessory.
2
4