1 0 . System panel connector (10-1 pin F_PANEL1)
This connector supports several chassis-mounted functions.
®
P5GD1-FM
P5GD1-FM System panel connector
•
ATX power button/soft-off button (2-pin PWRSW)
This connector is for the system power button. Pressing the power
button turns the system on or puts the system in sleep or soft-off
mode depending on the BIOS settings. Pressing the power switch for
more than four seconds while the system is ON turns the system OFF.
•
Hard disk drive activity LED (2-pin IDELED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD
Activity LED cable to this connector. The IDE LED lights up or flashes
when data is read from or written to the HDD.
•
Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for
system reboot without turning off the system power.
ASUS P5GD1-FM
PWRSW
F_PANEL1
IDE LED
RESET
Requires an ATX power supply.
*
1 - 3 1