Advertisement
Quick Links
Advertisement
Related Manuals for Kogan KAUSBTNTBLA
Summary of Contents for Kogan KAUSBTNTBLA
-
Page 2: Before Use
3. Due to the risk of electrical shock, do not open the casing. Should a foreign object accidentally find its way into the interior of the unit, contact the Kogan customer support team. 4. Do not attempt to clean the unit with chemical solvents as this might damage the finishing, A clean, dry cloth is recommended for cleaning. -
Page 3: Listening To A Record
1. TONE ARM REST: this rest is used to hold the tone arm while you are loading your record, 2. RPM: 45RPM Adapter 3. ARM CLIP: This specially designed arm clip secures the tone arm when nor in use at upright position. When the unit is in use, fold this tone arm down so as to not block your record. -
Page 4: How To Replace The Needle
HOW TO REPLACE THE NEEDLE To replace the needle, please refer to the instructions below. Removing the needle form the cartridge 1. Place a screwdriver at the tip of the needle heads hell and push downwards in the direction shown in sketch “A” 2. - Page 5 Hardware and Software Installation NOTE: Connect your turntable to your computer with the USB cable. No extra driver is required. 1. Hardware Installation The Audio Capture device doesn’t need any driver installation, as Windows OS will install the driver automatically. Please connect audio capture USB connector into one of your computer’s free USB2.0 ports.
- Page 6 2. Software Installation Insert the CD (supplied) into the CD drive and follow the onscreen instructions. Once the software is installed, you can connect the record to digital converter to your computer using the USB cable (supplied) to transfer your audio. Please insert software CD in your CD drive, and double click ”My Computer”...
- Page 7 3. Operation. Double click “audacity” icon on your computer’s desktop, please select your Language first, then click ”OK”. Please click “Edit” key on the software panel, and select “Preferences” Please select recording device to be “USB Audio Device”, and channels to Be “2(Stereo)”.And select ”Play other tracks while recording new one”...
- Page 8 B，Now, we start to record analogue audio to be a digital MP3 file. Please click red record key to start recording audio that you want. When you are finished, please click the yellow stop key.
- Page 9 For the first time, we need to do more steps if we want to export as MP3 file. Click “File”, and select “Export As MP3”. You need to give one file name and location now.
- Page 10 Then you may wish to fill out any additional artist or album information. Now you can transfer the mp3 music file(s) to your iPod, Smartphone or other digital music streaming device.