Assembly - Sears 415.23668310 Owner's Manual

ASSEMBLY

Left Leg
1
Place one upper leg as shown . NOTE: Left front and left back legs do not have leg extenders. In front, attach upper leg,
side brace and left front leg (curved) with (1) #10-24x1-1/4" machine screw and (1) #10-24 flange nut. Tighten screw.
Attach support bracket, oriented as shown, in the second hole from bottom of leg with (2) hinge pins and (2) hitch pins (A).
#10-24
Flange Nut
Qty. 1
#10-24x1-1/4''
Machine Screw
Qty.1
A
Right Leg
2
Place other upper leg as shown. Attach upper leg and right front leg (curved) with (1) #10-24x1-1/4" machine screw and
(1) #10-24 flange nut.
Attach support bracket, oriented as shown, with (2) #10-24x1-1/4" machine screws and (2) #10-24 flange nuts. Tighten
screws.
Right Back Leg
(Straight)
Leg Extender
16 • 464622013
Hitch Pin
Qty. 2
Hinge Pin
Left Back Leg
Qty. 2
(Straight)
Support Bracket
Hitch Pin
Right Front Leg
(Curved)
#10-24x1-1/4''
Machine Screw
Upper Leg
Left Front Leg
(Curved)
Hinge Pin
#10-24
Flange Nut
Qty. 3
Qty.3