Table of Contents
Advertisement
3.
Connect a VGA signal cable, DVI-D signal cable, or DisplayPort signal cable. Refer to
Connecting the Cables on page
LA1956x Model) on page
NOTE:
determined by the video cable used. The monitor will automatically determine which inputs have
valid video signals. The inputs can be selected by pressing the
or through the On-Screen Display (OSD) feature by pressing the
For analog operation, connect the VGA signal cable to the VGA connector on the rear of the
●
monitor and the other end to the VGA connector on the computer (cable provided with select
models).
For DVI digital operation, connect the DVI-D signal cable to the DVI connector on the rear of
●
the monitor and the other end to the DVI connector on the computer (cable provided with
select models).
For DisplayPort digital operation, connect the DisplayPort signal cable to the DisplayPort
●
connector on the rear of the monitor and the other end to the DisplayPort connector on the
computer (cable provided with select models).
4.
Connect one end of the provided USB cable to the USB hub connector on the rear panel of the
computer, and the other end to the upstream USB connector on the monitor.
ENWW
8Figure 2–8.
The monitor is capable of supporting either analog or digital input. The video mode is
8Figure 2–7 and
Figure 2-6 Connecting the Cables (HP
+/source
button on the front panel
Menu
button.
Connecting the Cables
Figure 2-5
7
Hide quick links:
Advertisement
Table of Contents
