Transmit Ringing Tone - Brookstone Walkie-Talkie Radios Instruction Manual

excludINg a cHaNNel
If you don't want to use a channel found during the channel scanning process,
it can be excluded.
While the unwanted channel is showing on the LCD screen, press and hold either
the or button for 3 seconds to exclude that channel.
Note: When a new channel scan is started, all channels are taken into
consideration again.

TraNSmIT rINgINg TONe

The ringing tones indicate to other subscribers that you want to talk to them.
The other subscribers must be using the same channel and CTCSS/CDCSS
code to hear the ringing tone.
Press the to send ringing tones.
SelecTINg/deacTIVaTINg THe rINgINg TONe
There are 10 ringing tones available for selection. To deactivate the ringing tone
function completely, select "0" (zero).
To choose a tone, press the
scroll through the channels using the
button to confirm your choice.
button 3 times to activate the programming mode,
or buttons and press the
18