Page 1
Loftek Loftek Series Series IP IP IP IP Camera Camera Loftek Loftek Loftek Loftek Series Series Series Series IP IP IP IP Camera Camera Camera Camera Loftek Loftek Series Series Camera Camera 2200 2200 2200 2200 2200 2200 2200 2200...
Loftek CXS 2200 User Manual Index Index Index Index 1 1 1 1 INTRODUCTION INTRODUCTION INTRODUCTION INTRODUCTION ........................4 4 4 4 ........................................................................2 2 2 2 FEATURES FEATURES FEATURES FUNCTIONS FUNCTIONS FEATURES AND AND FUNCTIONS FUNCTIONS ................
Page 3
Loftek CXS 2200 User Manual 7.3.1 User Settings............................. 7.3.2 Multi Device Settings........................7.3.3 Other Settings......................................................AINTENANCE 7.4.1 Device Information.......................... 7.4.2 Time Settings............................. 7.4.3 Firmware upgrade........................... 7.4.4 Restore Factory Default......................... 7.4.5 User Browsing Log.......................... 8 8 8 8 CENTRALIZED CENTRALIZED...
Introduction Introduction The CXS 2200 IP Camera combines a high-quality digital video camera with network connectivity and a powerful web server to bring clear video to your computer or phone from anywhere on your local network or over the Internet.
Loftek CXS 2200 User Manual Alarm recording can be sent via email or through FTP server. External alarm can be • connected to various triggering devices. Infrared night vision LED's cover a 15 ft area to enable 24-hour monitoring. •...
Loftek CXS 2200 User Manual detected stimulus such as smoke or movement, the detector will switch on or switch off and send the external alarm signal to the IP camera. Input pins Switch PIR Power Figure 4 6 6 6 6 ) Power...
Loftek CXS 2200 User Manual 1) In the diagram, IP Camera-1 and IP Camera-2 are connected separately to 2 different LANs. 2) These 2 LANs are already connected to the Internet. They consist of a router and a modem provided by the Internet Service Provider (ISP) and are connected via ADSL or optical fiber, etc.
Page 9
Loftek CXS 2200 User Manual 2) Change the content of “IP config” on the right to make sure the content is the same as “Local PC information”. Only the last section of the IP address needs manual setting. Usually it is set at 139 as in Figure 6.
Loftek CXS 2200 User Manual The IP Camera’s default setting is fixed IP address 192.168.0.178 and fixed http port 80. Users may press down the reset button to restore the factory settings, and use this default IP address to access the IP Camera.
Page 11
Loftek CXS 2200 User Manual Figure 9 1 1 1 1 ) Menu Menu Menu Menu column column column column There are two menu options: main menu and sub-menu. The main menu lies at the top of the interface and controls View, Network, Alarm, and Maintain functions; The Sub-menu lies on the left of the interface.
Loftek CXS 2200 User Manual Start video, stop, monitor, talk, record and snapshot controls. Click the button to activate the desired function. 5 5 5 5 ) PTZ video video control control PTZ and and video video control control In the Pan/Tilt control area, the user can control the movement according to the arrow indicators: up, down, left, right, center, horizontal cruise, vertical cruise, and stop.
Loftek CXS 2200 User Manual To set up multiple IP Cameras into a WAN, every device should be set up with port forwarding. In order to distinguish these devices, every device must use a unique port. For ports other than 80, user should designate the port after the IP address with a colon.
Loftek CXS 2200 User Manual Figure 12 The third party domain name will be displayed in the browser when accessing the camera. If the port is not 80, the port number should be added to the http://robbicam2.3322.org:81 http://robbicam2.3322.org:81 domain name with a colon. Example: http://robbicam2.3322.org:81...
Loftek CXS 2200 User Manual Figure 14 Note: When the device is connected to both WIFI and a cable, it will first connect to the wired network. If a link cannot be established, it will open the wireless connection. The IP address and port are the same for both connections.
Loftek CXS 2200 User Manual 7.1.6 7.1.6 Settings Settings 7.1.6 7.1.6 MSN MSN Settings Settings Figure 17 To use the MSN feature, input the MSN account user name and password as shown in Figure 17, and add a list of MSN contacts. When the device is online, it will show up on the contacts’...
Loftek CXS 2200 User Manual 3 3 3 3 ) Scheduler Scheduler Scheduler Scheduler The camera’s alarm will be active during the scheduled times. Please set the system time, time zone, and select the scheduled time. Please refer to figure 18.
Loftek CXS 2200 User Manual Figure 19 Please check that your email server allows POP3 functions, or the email function cannot be set. Refer to your email service’s help page for steps on setting up a remote email client such as Outlook or Thunderbird for more information.
Loftek CXS 2200 User Manual server, even if no alarm is triggered. In order to use the FTP function, users must establish an FTP site with enough storage capacity to hold the images, and the authority to write and create sub-categories.
Loftek CXS 2200 User Manual 7.3.2 7.3.2 Multi Multi Device Device Settings Settings 7.3.2 7.3.2 Multi Multi Device Device Settings Settings Figure 25 Up to 9 devices can be viewed simultaneously. Click the refresh button to check the devices in the LAN. After selecting a device, input the device info into the popup setting dialogue box as shown in figure 26 and click save.
Loftek CXS 2200 User Manual Figure 27 7.4 Maintenance Maintenance Maintenance Maintenance 7.4.1 Device Information 7.4.1 7.4.1 7.4.1 Device Device Device Information Information Information Figure 28 7.4.2 7.4.2 7.4.2 7.4.2 Time Time Time Time Settings Settings Settings Settings If the device is connected to the Internet, users can enable the NTP server to correct the time and select the time zone.
Loftek CXS 2200 User Manual Figure 30 7.4.4 7.4.4 7.4.4 7.4.4 Restore Restore Restore Restore Factory Factory Factory Factory Default Default Default Default After clicking “Restore Factory Default”, a dialogue box will open to confirm the selection. After confirmation, the system will be restored to the original factory defaults and rebooted.
Loftek CXS 2200 User Manual IPCMonitor is monitoring software included with the camera. Several devices on the LAN and WAN can be browsed at the same time. The software supports snapshot, video recording, alarms and other functions. The interface is shown in Figure 31.
Loftek CXS 2200 User Manual Audio Out Audio Line-out interface x 1 Weight 245g Main body 100mm(L)*99mm(W)*118mm(H) Power DC 5V Physical Power consumption <6W Index Operating 0℃~ 45℃ temperature Operating 10% ~ 80% non-condensing temperature OS Supported Microsoft Windows 98/2000/XP/Vista Internet Explorer6.0 and Above or Compatible...
Page 26
Loftek CXS 2200 User Manual 192.168.0.100, it can only access cameras with an IP address between 192.168.0.1~192.168.0.255. 6) 6) 6) 6) I I I I can can’ ’ ’ ’ t t t t access access access access the the camera...