Tv Settings; System Settings - I-CAN 1110TH ISLAND User Manual

TV Settings

The TV Settings screen contains the following options:
TV Screen Format – The TV Screen Format option
should be set to correspond with the format of your TV
screen. The default TV Screen format is 4:.
Display Format
- If your TV screen format is different
than the format of the program currently broadcast, you
can choose the way the picture is 'transformed'. You can
choose between Full Screen, Letter-Box and Pan-Scan.
TV SCART Output
– If your TV does not support the
RGB color model, you can switch to CVBS.
TV Settings
Video Resolution
- This option allows you to change the
resolution (see page 1).

System Settings

The System Settings screen contains some of the
configuration parameters you may want to change. They
are as follows:
Default CA System
– This option is inactive.
Dolby Digital
- If you want to enjoy the surround sound
and you are using a Dolby Digital receiver (e.g. Home
Cinema system), set the Dolby Digital option to Yes.
Note: If you set this option to Yes, the sound will only be
available on the S/PDIF and HDMI outputs.
Auto Upgrade in Standby – If this option is set to Yes,
System Settings
and you switch your decoder into standby mode, after
about one hour, the decoder checks whether a new
software version is available. If a new software version is
detected, the upgrade is carried out automatically.
If you set the Auto Upgrade in Standby option to No, the upgrade process is not carried out
automatically and you will be informed about the upgrade possibility once you have switched on
your decoder.
Auto Upgrade in Operate – If this option is set to Yes, the decoder checks for new versions of
software also in operate mode. When the process of checking is initiated, you are informed about
it by means of suitable messages appearing on the screen. You can define the time and frequency
of these checks by means of the Check Time and Check Repeat options.
Check Time – This option allows you to specify the time when you want your decoder to check for
upgrades in operate mode.
Check Repeat
– This option allows you to choose how often you want your decoder to repeat the
checks for upgrades in operate mode.
Channel Numbering – Displays information about the way channels are numbered. This message
is for the informative purpose only and it cannot be modified.
8
1110TH Island