Advertisement
Quick Links
Advertisement
Related Manuals for Goldair 75CM
Summary of Contents for Goldair 75CM
- Page 1 Operating Instructions 75CM Industrial Wall Fan Item: GCHV100...
- Page 2 General care and safety guide Thank you for choosing this GOLDAIR Fan. This GOLDAIR appliance has been designed and manufactured to high standards of engineering and with proper use and care, as described in this leaflet, will give you years of useful service.
- Page 3 To access the fan blade , remove the front guard and securing screw. TECHNICAL SPECIFICATION Model No: GCHV100 Power Supply: 220V-240V / 50Hz Power: 220W SUPPORT AND TECHNICAL ADVICE PO Box 100707, NSMC, Auckland, New Zealand Monday – Friday 8am-5pm Phone: 0800 232 633 Website: www.goldair.co.nz...
-
Page 4: Operating Your Fan
Components Operating your Fan Assembly Snap together the front guard to the rear Unscrew the base locking screw and ring guard by clamping the guard clips into the from the stand pole and insert the stand pole rear guard and use a cross screw driver to through the hole in the centre of the cross fasten the screw with nut into hole of rear base. - Page 5 Operating your Fan Fan control switch The control switch positions are: • • 0 = OFF 2 = Medium Speed • • 1 = Low Speed 3 = High Speed Check that the Fan control switch is set to the off position before plugging into the mains supply.
-
Page 6: One Year Warranty
One year Warranty Your Goldair product has been inspected and If the product is to be replaced (cannot be tested and is guaranteed subject to the repaired) then that replacement will be of the following for a period to One year from the...