Using Quick Record; Playing A Tape - Radio Shack voice activated Microcassette Recorder Owner's Manual

14-1184.fm Page 15 Wednesday, June 28, 2000 8:53 AM
5. To temporarily stop recording, slide
away from
PAUSE
recording, slide
PAUSE
6. Recording stops when the tape
reaches its end. To stop it sooner,
press .
STOP/EJECT

Using Quick Record

During playback, you can press
to immediately start recording without
pressing first.
STOP/EJECT

PLAYING A TAPE

1. Load a microcassette tape.
2. Set to the speed used
TAPE SPEED
when the tape was recorded.
To listen to the tape at about 25%
faster than normal speed, slide
to
SPEED 2.4 FAST PLAY
3. Press to begin play.
PLAY
4. Adjust
VOL/MIC SENS
listening level.
5. The tape automatically stops when it
reaches its end. Press
to stop playback sooner.
Operation
. To resume
OFF
to .
OFF
RECORD
TAPE
.
to the desired
STOP/EJECT
15