Receiving Calls; Adjusting The In-Call Volume - Huawei U.S. Cellular FT2260 User Manual

While on the first call, dial the number of the second party.
1.
Press FLASH; the first party is automatically put on hold while the call is made.
2.
When the 2nd party answers, press FLASH to initiate the 3-way call.
3.
If the second party does not answer, press the FLASH key twice to end the
4.
connection and return to the first party.
To end both conversations, press the switch hook key on your phone.
5.

Receiving Calls

Lift the handset to answer an incoming call.
 Note:
If your telephone requires external power to operate, service (including the ability to
make and receive 911 calls) will not be available during a power outage.

Adjusting the In-Call Volume

Take the phone off the hook so you can hear the dial tone and verify that
1.
telephone service is available.
Press # # 1 to adjust the volume.
2.
Press keys 1 to 4 to select the desired volume.
3.
After selecting the desired volume, press the * key to save it. If you hear a single
4.
confirmation tone, you have successfully set the volume level.
 Note:
When you have pressed an incorrect key you will hear a double tone. The system will
return to the off-hook state, you can try adjusting the volume again when you hear the
dial tone.
11