Generac Power Systems Air-Cooled Generator Sets 5621 Specification

STANDBY GENERATOR ACCESSORIES
Model 5621
Auxiliary Transfer Switch
Contact Kit
DESCRIPTION
The auxiliary transfer switch contact kit allows a single large electrical
load to be locked out from generator operation. If a home is equipped
with electrical heat or multiple central air conditioning units, this
device allows the generator transfer switch to interrupt the control
wire, breaking the signal needed for the appliance to turn on.
INSTALLATION INFORMATION
• Once installed, the control wire must be run from the appliance to
the transfer switch to connect to the contact.
Miscellaneous Accessory Kits
Generac Power Systems, Inc. • P .O. Box 297, Whitewater, WI 53190 • generac.com
©2008 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice. Bulletin 0177550SBY/Printed in U.S.A. 04.08, rev. 05.08
Air-Cooled Generator Sets
Model 5666
Fascia Base Wrap Kit
DESCRIPTION
The fascia base wrap snaps together around the bottom the new air
cooled generators. This offers a sleek, contoured appearance as well
as offering protection from rodents and insects by covering the lifting
holes located in the base.
Please note that this wrap only fits air-cooled generators
manufactured after 4/2008 that have the contoured body wrap
style and are only available in grey.