Installation; Audio Connections; Specifications - Behringer Pro Mixer VMX1000USB User Manual

8
3.

Installation

3.1

Audio connections

for various applications, you will need a number of different
cables. The following illustrations show how these cables are
to be connected. Always make sure to use high-grade cables.
◊ Be sure that installation and operation of your
VMX1000USB are performed only by qualified
personnel. During as well as after installation, sufficient
grounding of both your equipment and persons
handling it must be assured. Otherwise, electrostatic
discharge may lead to undesirable operation or
permanent damage.
input
2 1
3
1 = ground/shield
2 = hot (+ve)
3 = cold (-ve)
output
1 2
3
For unbalanced use, pin 1 and pin 3 have to be bridged
Balanced use with XLR connectors
Fig. 3.1: XLR connections
Strain relief clamp
Sleeve
Tip
Sleeve
(ground/shield)
Tip
(signal)
Unbalanced ¼" TS connector
Fig. 3.2: ¼" TS connector
PRO MIXER VMX1000USB User Manual
strain relief clamp
sleeve
ring
tip
sleeve
ground/shield
ring
cold (-ve)
tip
hot (+ve)
For connection of balanced and unbalanced plugs,
ring and sleeve have to be bridged at the stereo plug.
Balanced 1/ 4" TRS connector
Fig. 3.3: ¼"TRS connector
strain relief clamp
sleeve
ring
tip
sleeve
ground/shield
ring
right signal
tip
left signal
1/ 4" TRS headphones connector
Fig. 3.4: ¼" TRS headphone connector
tip tip
sleeve sleeve
shield
Fig. 3.5: RCA cable
PRO MIXER VMX1000USB User Manual
4.

Specifications

AUDIO INPUTS
Mic In 40 dB gain, XLR,
electronically balanced input stage
Phono In 40 dB gain, unbalanced input
Line In -17 to +4 dB gain, unbalanced inputs
Return 0 dB gain, unbalanced
Mic Aux Return 3 dB gain, unbalanced
AUDIO OUTPUTS
Main Out max. 25 dBu @ 1 kHz, XLR
electronically balanced
Main 2 Out Max. 21 dBu @ 1 kHz unbalanced
Tape Out typ. 0 dBu
Send typ. 0 dBu
Mic Aux Send -oo to +6 dBu
Phones Out max.180 mW @ 75 Ω
SUBWOOFER
Subwoofer Out XLR, electronically balanced
X-Over variable 30 Hz - 200 Hz
Level -o o to 0 dBu @ 0 dB input
EQUALIZER
Stereo Low +12 dB/-32 dB @ 50 Hz
Stereo Mid +12 dB/-32 dB @ 1.2 kHz
Stereo High +12 dB/-32 dB @ 10 kHz
Mic Low +15 dB/-15 dB @ 80 Hz
Mic Mid +15 dB/-15 dB @ 2.5 kHz
Mic High +15 dB/-15 dB @ 12 kHz
USB
Audio Stereo In/Out
Connector Type B
Converter 16-bit
Sample rate 48 kHz
SYSTEM SPECIFICATIONS
Signal-to-noise ratio > 80 dB (line)
Crosstalk < -70 dB (line)
Distortion (THD) < 0.05 %
Frequency response 10 Hz - 65 kHz, +0/-3 dB
POWER SUPPLY
Mains voltages USA/Canada 120 V~, 60 Hz
Europe/U.K./Australia 230 V~, 50 Hz
Japan 100 V~, 50 - 60 Hz
General export model 120/230 V~, 50 - 60 Hz
Power consumption 22 Watt
Fuse 100 - 120 V~: T 500 mA H
200 - 240 V~: T 250 mA H
Mains connection Standard IEC receptacle
DIMENSIONS/WEIGHT
Dimensions
(H x W x D) 107 mm (43/16") x 483 mm (19")
x 223 mm (8 3/4")
Weight 3.6 kg (7 lb. 14 oz.)
BEHRINGER makes every effort to ensure the highest standard of quality. Necessary modifications are carried out without notice.
Thus, the specifications and design of the device may differ from the information given in this manual.
9