Oregon Scientific SZ999 User Manual

Bluetooth Smart Fabric Chest Belt
Model: SZ999
User Manual
The SZ999 water resistant fabric chest belt is equipped with
the latest Bluetooth Smart technology to achieve reliable
transmission linkage with sports system device that is with
the logo and corresponding application.
SMART READY
EN
OVERVIEW
HEART RATE DETECTOR
Battery compartment
Snap buttons
front view back view
BELT STRAP
Snap buttons
front view
Conductive pads
back view
WEARING THE CHEST BELT
The chest belt counts your heartbeat
and transmits the data.
1. Align the heart rate detector unit
with the snap buttons on the
belt strap. Secure by snapping
into place.
2. Unfasten the belt strap.
3. Wet the conductive pads on the
underside of the chest belt with a
few drops of water or conductive
gel to ensure solid contact.
4. Position the heart rate detector
unit below your chest, while
making sure logo is the right way
up. Wrap the strap around your
chest and fasten into place.
To ensure an accurate heart rate
signal, adjust the strap until the belt sits
snugly below your pectoral muscles.
TIPS
• The position of the chest belt affects its performance.
• Avoid areas with dense chest hair.
• In dry, cold climates, it may take several minutes for the
chest belt to function steadily. This is normal and should
improve with several minutes of exercise.
TRANSMISSION SIGNAL
The SZ999 chest belt can be paired and provide heart rate
readings. Locate your chest belt close to your device to help
achieve pairing. The heart rate chest belt has a maximum
transmission range of about 100 centimeters (40 inches).
To search for heart rate signal, refer to the instructions of
your device.
PAIR WITH OREGON SCIENTIFIC BLUETOOTH SMART
SPORTS SYSTEM DEVICE
To pair with Oregon Scientific Bluetooth Smart device (such
as SE900 or RA900 Ssmart Watch), please refer to the
particular pairing instructions in the User Manual.
If your sports device is already paired with a chest belt, you
have to first delete the chest belt before you are able to pair
with another chest belt.
NOTE While pairing, make sure to stay away from other
devices and move the chest belt to pair close to your device.
TROUBLESHOOTING
In the event that you experience a weak signal or your signal
is disrupted by interference in the environment, follow the
instructions below to identify and resolve the situation.
1. The signal is weak.
• Shorten the distance between the heart rate chest
belt and device.
• Re-adjust the position of the heart rate chest belt.
• Check the conductive pads are moist enough to
ensure solid contact.
• Check the battery. If they are low or exhausted, the
transmission range may be shortened.
• Force a signal search on the watch.
2. The gym equipment does not seem to work with your
chest belt.
• Most gym equipment is compatible with analog
transmission. This chest belt does not transmit an
analog signal, it only uses the low energy Bluetooth
Smart technology.
3. Signal is jammed or there is interference from another
person's heart rate monitor:
• There is too much interference in the environment
for your heart rate monitor to function. Move to an
area where the watch can register your heart rate
reading and/or force another signal search.
WARNING Signal interference in the environment can be
caused by electromagnetic disturbances. These may occur
near high voltage power lines, traffic lights, overhead lines
of electric railways, electric bus lines or trams, televisions,
car motors, bike computers, some motor driven exercise
equipment, cellular phones or when you walk through
electric security gates. Under interference, the heart rate
reading may become unstable and inaccurate.
REPLACE BATTERY
Please replace battery promptly as it may affect the accuracy
of the readings.
To replace the chest belt battery:
1. Detach the heart rate detector unit from the belt strap.
2. Use a coin to open the battery compartment lid by
turning it anticlockwise to open.
3. Remove the old battery and insert a new CR2032, 3V
lithium battery. Make sure to place the battery in the
compartment following the polarity +/-.
4. Secure the lid by turning the coin clockwise.
IMPORTANT Remember to set the profiles after every
battery replacement or reset.
CARE INSTRUCTIONS
The belt strap can be hand washed. Remember to detach
the heart rate detector unit!
• Do not wrap the detector unit in a wet towel nor with
other wet materials.
• Do not place or wash the heart rate detector unit under
running water, instead clean it with a wet cloth.
• Properly dry the detector unit immediately after use.
• Do not store the chest belt in a hot (about 50°C) and
humid (about 90%) environment.
• Do not place the conductive rubber face down on a
metal table or surface.
• Do not bleach, dry clean, tumble dry or iron the belt strap.
WATER RESISTANCE
The SZ999 is water-resistant up to 10 meters (32.8 feet).
Not recommended to use for swimming.
SHALLOW
SHOWERING LIGHT
RAIN DIVING / SNORKELING/
(WARM / SWIMMING/
SPLASHES SURFING/ DEEP WATER
COOL WATER SHALLOW
ETC WATER DIVING
ONLY) WATER
SPORTS
10M /
32.8 OK NO NO NO NO
FT
NOTE Ensure the battery compartment is secured and
intact before exposing to excessive water.
SPECIFICATIONS
Heart rate detector 66.1 x 38 x 12.5 mm
dimension (LxWxH) (2.6 x 1.5 x 0.49 inches)
Power 1 x CR2032 3V lithium battery
Operating temperature 5˚C to 40˚C (41˚F to 104˚F)
Storage temperature -20˚C to 60˚C (-4˚F to 140˚F)
PRECAUTIONS
To ensure you use your product correctly and safely, read
these warnings and the entire user manual before using
the product:
• Use a soft, slightly moistened cloth. Do not use abrasive
or corrosive cleaning agents, as these may cause
damage. Use luke warm water and mild soap to clean
the watch and chest belt thoroughly after each training
session. Never use the products in hot water or store
them when wet.
• Do not bend or stretch the transmitter part of the chest belt.
• Do not subject the product to excessive force, shock,
dust, temperature changes, or humidity. Never expose
the product to direct sunlight for extended periods. Such
treatment may result in malfunction. Do not tamper with
the internal components. Doing so will terminate the
product warranty and may cause damage. The main unit
contains no user-serviceable parts.
• Take precautions when handling all battery types.
• Remove the batteries whenever you are planning to
store the product for a long period of time.
• When replacing batteries, use new batteries as specified
in this user manual.
• The product is a precision instrument. Never attempt to
take this device apart. Contact the retailer or our customer
service department if the product requires servicing.
• Do not touch the exposed electronic circuitry, as there is
a danger of electric shock.
• Check all major functions if the device has not been
used for a long time. Maintain regular internal testing
and cleaning of your device. Have your watch serviced
by an approved service center annually.
• When disposing of this product, ensure it is collected
separately for special treatment and not as normal
household waste.
• Due to printing limitations, the displays shown in this
manual may differ from the actual display.
• The contents of this manual may not be reproduced
without the permission of the manufacturer.
NOTE The technical specifications for this product and
the contents of the user manual are subject to change
without notice.
ABOUT OREGON SCIENTIFIC
Visit our website www.oregonscientific.com to learn more
about Oregon Scientific products.
For any enquiry, please contact our Customer Services at
info@oregonscientific.com.
EU-DECLARATION OF CONFORMITY
Hereby, Oregon Scientific, declares that Bluetooth Smart
Fabric Chest Belt (model: SZ999) is in compliance with
the essential requirements and other relevant provisions
of Directive 1999/5/EC. A copy of the signed and dated
Declaration of Conformity is available on request via our
Oregon Scientific Customer Service.
COUNTRIES RTTE APPROVED COMPLIED
All EU countries, Switzerland CH
and Norway N
: SZ999
SMART READY
Ssmart watch
http://ssmart.oregonscientific.com/Japan/
QR
JAP
1.
2.
3.
4.
•
•
•
1.
•
•
•
•
•
2.
•
3.
•
1.
2.
3.
4.
•
•
•
•
•
•
10m OK NO NO NO NO
66.1(L)x38(W)x12.5(H)mm
CR2032 3V
5°C to 40˚C
-20°C to 60˚C
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
104-0041
1-13-21
TEL0120-11-4820
( 10:00~12:00/13:00~17:00)
•
•
•
•
•
•
•