Wel-Bilt 365398 Owner's Manual page 5

Step 2: Attach hydraulic pump
Assemble the hydraulic pump (part # 12) to base by using two inner hex screws M8x16 (part # 14).
Note please use inner hex wrench to assemble this pump.
Step 3: Attach Base Feet
Attach Base Feet (part #22) to bottom of main post near hydraulic pump. One foot per side. Secure
each foot using two M10X25 Hex Bolt (part #19) two Ø10 lock washer (part #20) and two M10 Hex
Nut (part #21).
NOW POSITION LOG SPLITTER VERTICALLY ONTO FEET
Page of 11
5