1. Manuals
  2. Brands
  3. Comet Labs Manuals
  4. Telephone Accessories
  5. IPTEL-H
  6. User manual

Comet Labs IPTEL-H User Manual

Voip telephone adaptor
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
VoIP Telephone Adaptor

User Manual

Model Nr. IPTEL-H / IPTEL-S / IPTEL-M
V1.7
English Version
Copyright 2004 ®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IPTEL-H and is the answer not in the manual?

Questions and answers

Summary of Contents for Comet Labs IPTEL-H

  • Page 1: User Manual

    VoIP Telephone Adaptor User Manual Model Nr. IPTEL-H / IPTEL-S / IPTEL-M V1.7 English Version Copyright 2004 ®...
  • Page 2 Quick Guide Step 1: Broadband (ADSL/Cable Modem) Connections For IPTEL A. Connect IPTEL-H / IPTEL-S / IPTEL-M RJ45 LAN port to Router/ADSL as one of the following connections. B. Connect IPTEL RJ45 PC port to PC using a Category 5 LAN cable.
  • Page 3 c. ADSL Connections without Router for IPTEL (refer to PPPoE section in Chapter 9. PC Telnet Command Mode) ADSL Modem Ethernet Switch IPTEL IP: 192.168.1.150 (#11) Subnet Mask: 255.255.255.0 (#12) IPTEL Router IP: 192.168.1.254 (#13) Telephone 1. Run From PC: Telnet 192.168.1.150 2.
  • Page 4 Step 2: IP Settings for IPTEL-H / IPTEL-S / IPTEL-M with Static IP A. Prepare for IPTEL IP Address, Subnet Mask, and Router IP Address. (*) B. Pick up the phone, and you should hear a dial tone. C. Press #11 + IP Address to enter IPTEL IP address Example: Press #11061020102004 if IPTEL static IP address is 61.20.102.4...

  • Page 5: Table Of Contents

    TABLE OF CONTENTS Introductions …………………………………………………… Features …………………………………………………………… Standard Compliances ……………………………………… Packing Contents ……………………………………………… LED Indicators ………………………………………………… Installations & IP Configurations ……………………… Telephone Keypad Dialing ………………………………… Telephone Command Modes ……………………………… Hot Line Mode Operations …………………………… PC Telnet Command Modes ……………………………… Gatekeeper Mode Operations ………………………...

  • Page 6: Introductions

    1. Introduction The IPTEL-H / IPTEL-S / IPTEL-M is a single port Telephone Adaptor (TA) for Voice over IP (VoIP), and it supports H.323, and SIP (optional) Protocols. Connecting to the Internet with a plain old telephone set (POTS), the IPTEL can make a voice call over the Internet from one IP to another one.

  • Page 7: Packing Contents

    4. Packing Contents Inside the package you should find: (1) One IPTEL Phone (2) One DC Power Adaptor (3) One Phone cable (4) One LAN cable Please check if the packing is damaged before unpacking or any component is missing. If so, please contact your distributor.

  • Page 8: Installations & Ip Configurations

    6. Installations & IP Configurations 1. Connect IPTEL RJ45 LAN port to Router using the Category 5 LAN cable. 2. Connect IPTEL RJ45 PC port to Notebook PC using a Category 5 LAN cable. 3. Connect IPTEL RJ11 PHONE port to a Plain Old Telephone Set (POTS). 4.

  • Page 9: Telephone Keypad Dialing

    7. Telephone Keypad Dialing You may now start making a VOIP call by dialing the IP address directly from the telephone. There are 5 different types of dialing for IPTEL; 1) Direct Static IP Dialing (#200): 12-15 digits for Point-to-Point and Point-to-Multiport Gateway static IP dialing. 2) Direct Static IP Dialing + Gatekeeper Mode Dialing (#201): 1-11 digits for Gatekeeper Mode dynamic IP dialing, and 12-15 digits for direct Point-to-Point and Point-to-Multiport Gateway static IP dialing.

  • Page 10: Telephone Command Modes

    Press #01# to reset the default values for IPTEL. Note that this does not change the password. Set Password Press #01xxx# to set the “xxx” password into IPTEL-H / IPTEL-S / IPTEL-M. If you forgot the password when using PC telnet session, you may set a new password from the telephone.

  • Page 11: Hot Line Mode Operations

    4. Note that you may disable the Hot-Line mode by picking up the phone and pressing #400# in 3 seconds before the IPTEL-H / IPTEL-S / IPTEL-M calling out, and you will hear a dial tone for confirmation. You may also disable Hot-Line mode by PC telnet...

  • Page 12: Pc Telnet Command Modes

    NAT Router IPTEL IP: 192.168.1.150 (#11) IPTEL Subnet Mask: 255.255.255.0 (#12) Router IP: 192.168.1.254 (#13) Telephone If you forgot the current IPTEL-H / IPTEL-S / IPTEL-M IP address, you may enter the new IP address from telephone by using #11 commands.
  • Page 13 ” from PC Windows [Start] [Run] screen, assuming that the telnet 192.168.1.150 current IP address is 192.168.1.150. The default IP address for IPTEL-H / IPTEL-S / IPTEL-M is 192.168.1.150. Note that picking up the phone during the telnet command mode will logout the telnet session.
  • Page 14 9.5 To set the password, you may key in as follows. followed by the password 9.6 To change the settings, simply enter as follows. for gatekeeper IP address 61.66.159.237 for alias name “h3232601b669” (max 40 letters) Note that all-numeric number is not a valid alias name. for alias phone number “123456”...

  • Page 15: Gatekeeper Mode Operations

    Gatekeeper Mode Operations Gatekeeper Mode (#20) allows the user to make a direct call to another user with ADSL dynamic IP address registered in the gatekeeper. The IPTEL with dynamic IP address will register its current IP address to the gatekeeper under the assigned alias name and alias telephone number.

  • Page 16: Pppoe For Adsl Dynamic Ip

    PPPoE for ADSL Dynamic IP PPPoE (#05) allows IPTEL users to connect ADSL dynamic IP without NAT router as follows. ADSL Modem IPTEL IP: 192.168.1.150 (#11) IPTEL Subnet Mask: 255.255.255.0 (#12) Router IP: 192.168.1.254 (#13) Telephone For ADSL dynamic IP users, the Internet Service Provider (ISP) will provide user a PPPoE username and a PPPoE password for connection to Internet.

  • Page 17: Commands Summary

    10. Commands Summary: Entered from Telephone Set (POTS) Cmds Format Defaults Descriptions Enter From #01# #01# Reset to Defaults POTS #01xxxxx# Set Password xxxxx POTS #03+[0..999]+# Volume Control POTS #05+[0|1]+# PPPoE POTS #11+TA IP 192168001150TA IP Address POTS #12+Subnet Mask 255255255000Subnet Mask POTS #13+Router IP...
  • Page 18 Entered from PC Telnet session Format Defaults Descriptions Enter From #01xxxxx Set Password xxxxx #03+[0..999] Volume Control #05+[0|1] 0 (disabled) PPPoE #06+username Max 48 letters PPPoE username #07+password Max 48 letters PPPoE password #11+TA IP 192168001150 TA IP Address #12+Subnet Mask 255255255000 Subnet Mask #13+Router IP 192168001254 Router IP Address...

  • Page 19: Firmware Upgrade/Download Procedures

    11. Firmware Upgrade/Download Procedures There are two ways to download and upgrade the firmware for IPTEL-H / IPTEL-S / IPTEL-M. The first one is to download from the remote TFTP server by using telephone set. The second one is to download from the local PC with built-in TFTP server by using telephone set.

  • Page 20: Local Pc Download From Telephone

    Local PC Firmware Download from Telephone 11.3 Make sure that in the PC you have the built-in TFTP server and the upgrading image file with the name of “cometxxx.img”, which xxx is the F/W version. This upgrade image file can be available your local IPTEL dealer. 11.4 Open the TFTP server in the PC, and specify the directory of the image file, as the following diagram.
  • Page 21 11.5 Pick up the phone and press #050# to disable PPPoE first for IPTEL. 11.6 Press the download command followed by the PC TFTP server IP address and the image file version number. *01192168001194006 Example: Press where 192.168.1.194 is the PC TFTP server IP address, and 006 is the F/W version of image file “comet006.img”...

This manual is also suitable for:

Iptel-sIptel-m

Table of Contents