Bios Setup - Cmos Setup Utility; Cmos Setup Utility - EMAXX EMX-IH55M-iCafe User Manual

Socket lga1156 processor mainboard intel h55 series
Table of Contents

Advertisement

Intel H55 Series
4.5 BIOS Setup — CMOS Setup Utility
•  In order to increase system stability and performance, our engineering staff is
constantly improving the BIOS menu. The BIOS setup screens and descriptions
illustrated in this manual are for your reference only, and may not completely
match with what you see on your screen.This chapter were based mainly on
model "H55M-L ", unless specif cally stated.
•  Do not change the BIOS parameters unless you fully understand its function.

4.5.1 CMOS Setup Utility

After powering up the system, the BIOS message appears on the screen,when the first time
or when CMOS setting wrong, there is following message appears on the screen , but if
the first BIOS be setuped(or loaded default values) and save, the <DEL> key will be
pressed if you will enter BIOS setup menu.
If this message disappears before you respond, restart the system by pressing <Ctrl> +
<Alt>+ <Del> keys, or by pressing the reset button on computer chassis. Only when these
two methods should be fail that you restart the system by powering it off and then back on.
After pressing <F1> or <Del> key, the main menu appears.
Main
Advanced
► System Information
System Time
System Date
Floppy A
Language
► SATA Port 1
► SATA Port 2
► SATA Port 3
► SATA Port 4
► AHCI Device
The menu bar on top of the screen has the following main items:
Main
Advanced
Boot
Security
Power
JUSTw00t!
Exit
Press
F1
BIOS SETUP UTILITY
Boot
Security
[20:50:32]
[Tue 09/03/2009]
[Disabled]
[English]
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
For changing the basic system configuration.
For changing the advanced system settings.
For changing the system boot configuration.
For changing the system security setttings.
For changing the advanced power management(APM) configuration.
For changing the overclocking settings.
For selecting the exit options and loading default settings.
to Run SETUP
Power
: [ST380215AS]
: [Not Detected]
: [Not Detected]
: [Not Detected]
- 1 -
JUSTw00t!
Exit
Select Screen
Select Item
↑ ↓
Enter Go to Sub Screen
F1
General Help
F10
Save and Exit
ESC
Exit
User's Manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents