Preparation; Turn On The Power - Canon CF-1 Operating Manual

000_L-IE-5152E_CF-1.book Page 25 Monday, July 29, 2013 10:30 AM

4. Preparation

Concerning the power-saving function
The power-saving function is activated under the following circumstances:
• When none of the switches on the operation panel have been operated for 10 or more minutes
• When none of the switches on the operation panel have been operated for 1 or more minutes
When the power-saving function has been activated, the POWER lamp on the operation panel
blinks.
To restore normal operation, press any switch on the operation panel, move the stage to the left or
right or operate the diopter compensation lever.
Concerning control software operations
For details on the control software operations, refer to the operation manual of the control
software.
Note: Before preparing to take photographs, check the sections on the Power Cable
Connections (see page 52), Attaching the EOS Digital Camera (see page 53) and
Connecting the USB Cable (see page 56).

4.1 Turn ON the power.

1
Turn ON the computer.
Turn ON the computer, and start the control software.
2 Turn ON the power of the main unit.
Press the power switch to the I side.
while power is supplied to the camera
after the operation to stop the timer has been performed during fluorescein angiography
photography
-25-