Troubleshooting - z-cyber Zing 7 Seven User Manual

R. Troubleshooting
Symptoms
No Power
Can't view photos
No video output in TV or the video
isn't normal
Small size of the photo displayed in
photo frame
No Sound from
Earphones
Cannot play video files.
Crash
Invalid Character on LCD Screen
S. Q&A
Questions
Which format of photo/music/video
does it support?
Which type of memory card does it
support?
How to store the music ?
What is the maximum size of the
photo it supports?
Can I rotate the photos in photo
frame?
Can I adjust the color of the photos?
7" Digital Photo Frame
Possible Reasons
Check whether the switch is
pushed to "on"
Check if the DC adaptor is inserted
correctly.
Photo format that isn't support
No photos in memory card
Wrong connection between Photo
frame and TV
The TV standard of the photo frame
does not match your TV set
Lower resolution of the photo
displayed
Check if the jack is detached from
the unit
Check if the volume is set to "0".
Check whether the plug is
contaminated / oxidized.
Check if the files format is
supported by the Photo frame
Check whether you have done
some invalid operation.
The character isn't supported by
the language you set
Photo: JPG
Music:mp3/wma
Video:MPEG1/2/4,Divx,Xvid(.avi)
SD / MS / CF / MMC
Use PC or music converting software to convert the music to mp3/wma,
then use memory card or USB flash drive to copy to photo frame
12 Mega pixel
Yes, you can use the button on remote control or panel to rotate;
No, the color has been set by the manufacturer. You can only adjust
the brightness and contrast of the LCD.
- 12 -
Actions
Push the switch to "on"
Insert the DC adaptor again
It supports the format of JPG only
Make sure there is at least 1
photo in memory card
Make sure the cable connection
is correct
Change TV standard setting to
match your TV set
Use large photo ; It is better to
use 320x240 or 640x 480
resolution
Re-install the earphones again.
Increase the volume.
Clean the jack.
Copy the right format to the photo
frame or use software to convert
the appropriate video format
Remove the DC adaptor from the
Photo frame and plug in again
Change the language setting
Answer