Installation - American DJ 3.3 User Instructions

Dotz Brick 3.3
Channel Value
29 PROGRAM SPEED/SOUND SENSE
0 - 255
30 0 - 255
31
0 - 255
32
0 - 41
42 - 84
85 - 127
128 - 170
171 - 213
214 - 255 DEFAULT TO UNIT CURVE SETTING
When Channel 28 is being used between the values of 136-239,
Channel 29 will control the speed of the programs.
When Channel 28 is being used between the values of 240-255,
Channel 29 will control sound sensitivity.
ADJ Products, LLC - www.adj.com - Dotz Brick 3.3 User Manual Page 20
32 Channel Mode
Function
PROGRAM SPEED SLOW - FAST
MASTER DIMMER 0% - 100%
STROBING
SLOW - FAST
DIMMER CURVES
STANDARD
STAGE
TV
ARCHITECTURAL
THEATER
Dotz Brick 3.3
When installing the unit, the trussing or area of installation must be
able to hold 10 times the weight without any deformation. When
installing the unit must be secured with a secondary safety attach-
ment, e.g. and appropriate safety cable. Never stand directly below
the unit when mounting, removing, or servicing the unit.
Overhead mounting requires extensive experience, including calculat-
ing working load limits, installation material being used, and perodic
safety inspection of all installation material and unit. If you lack these
qualifications, do not attempt the installation yourself.
These installaiton should be checked by a skilled person once a year.
The Dotz Brick 3.3 is fully operational in two different mounting posi-
tions, hanging upside-down from a ceiling or set on a flat level sur-
face. To avoid internal damage to the unit, never mount the unit on
its side as illustrated above. Be sure this fixture is kept at least 0.5m
away from any flammable materials (decoration etc.). Always use and
install the supplied safety cable as a safety measure to prevent acci-
dental damage and/or injury in the event the clamp fails. Never use
the carrying handles for secondary attachment.
Dotz Brick 3.3
With this feature you can connect the fixtures to one another
using the IEC input and output sockets. The quantity that can be
connected is 7 fixtures maximum for 120V, and 14 fixtures maxi-
mum for 230V. After the maximum fixtures has been reached you
will need to use a new power outlet. They must be the same fix-
tures. DO NOT mix fixtures.
ADJ Products, LLC - www.adj.com - Dotz Brick 3.3 User Manual Page 21

Installation

Power Cord Daisy Chaining