Electrical Connection - Electrolux ER1543T Instruction Book

Hide thumbs

Table Of Contents

Table of Contents

Any electrical work required to install this

appliance should be carried out by a

qualified electrician or competent person.

This appliance must be earthed.

The manufacturer declines any liability should

these safety measures not be observed.

Electrical Requirements

Before switching on, make sure the electricity supply

voltage is the same as that indicated on the appliance

rating plate.

The appliance is supplied with a 13 amp plug fitted. In

the event of having to change the fuse in the plug

supplied, a 13 amp ASTA approved (BS 1362) fuse

must be used. Should the plug need to be replaced

for any reason. The wires in the mains lead are

coloured in accordance with the following code:

Green and Yellow:

Blue:

Brown:

The wire coloured green and yellow must be

connected to the terminal marked with the letter „E" or

by the earth symbol

The wire coloured blue must be connected to the

terminal „N" or coloured black.

The wire coloured brown must be connected to the

terminal marked „L" or coloured red.

Upon completion there must be no cut, or stray

strands of wire present and the cord clamp must be

secure over the outer sheath.

This appliance complies with the following

E.E.C. Directives:

73/23 EEC of 19.02.73 (Low Voltage Directive)

and subsequent modifications,

89/336 EEC of 03.05.89 (Electromagnetic

Compatibility

Directive)

modifications.