Use; Control Panel; Controls - Electrolux EWF1246 Instruction Book

Use

Control panel

1 Programme chart
A programme chart is in the interior part of the
detergent dispenser drawer or is provided with the
instruction booklet.
2 Programme selector dial
The selector dial is divided into 4 sections:
• Cotton, synthetics and delicates (blue section)
• Handwash, wool, silk and mini-programme (green
section)
• Rinses, drain, spin and delicate spin (grey
section)
• Memory 1, memory 2, memory 3 (green section)
E
The selector dial can be turned either clockwise or
anticlockwise.
Position E corresponds to the ENERGY SAVING
programme for cotton and position O to Reset
programme/Switching OFF of the machine.
At the end of the programme the selector dial must
be turned to position O, to switch the machine OFF.
Attention!
If you turn the programme selector dial to another
programme when the machine is working, a warning
message appears for 4 seconds on the display while
the buzzer sounds for 3 times .
E
3 Display
The DISPLAY is used for setting a large number of
functions and combine them with each other using
only a few control elements (1 programme selector
dial and 6 buttons). This simple control method is
made easy thanks to the interactive display.
Interactive means that the washing machine display
changes to reflect each step you have entered. This
ensures that only those settings that make sense are
made. You are able to see the current settings at any
time in the information panel and in the option row.
1. Information panel shows the current settings
2. Real time clock
3. End cycle time
4. Selection shows temperature, spin speed, options
and extras.
4 Temperature button "Temp."
Press this button repeatedly to increase or decrease
the temperature, if you want your laundry to be
washed at a temperature different from the one
proposed by the washing machine.
Maximum temperatures are 90°C for cotton, 60°C for
synthetic fabrics, 40°C for delicate fabrics, wool and
fabrics to be hand-washed, 30°C for silk and
«Miniprogramme», while «0» corresponds to cold
wash.
By depressing Temperature "Temp." button, the
relevant message will appear on the second row of
10