Sandia Plastics Raven Series Safety, Operation And Maintenance Manual With Parts List

New Equipment Warranty

Lifetime warranty on roto-molded polyethylene tank, 5-years on motor and all
electrical parts, 1-year on tools.
Warranty Policy
All equipment is inspected and tested before shipping from the manufacturer. All
parts are warranted to be new and free from defects in workmanship and material,
under normal use to the original retail purchaser. This warranty limits manufacturer's
liability for defects in workmanship or materials for replacement of defective parts
only. Manufacturer accepts no liability for incidental or consequential damages
arisen from the use of any equipment, defective or not. This warranty is in lieu of all
expressed or implied warranties and is extended only to the original retail purchaser.
Manufacturer sales and service representatives are not authorized to waive or alter the
terms of this warranty, or to increase the obligations of the manufacturer under the
warranty. Parts replaced or repaired under warranty are warranted for the remainder of
the original warranty period.
Freight charges and travel charges to and from the service provider shall be covered
for ninety (90) days from the original purchase date. After this ninety (90) day
period, freight charges shall be paid by the equipment owner, subject to manufacturer
discretion. Certain circumstances may require additional consideration. No travel
charges shall be covered after ninety (90) days.
Manufacturer covers up to 1-year (365 days) of service labor at manufacturer's
calculated hourly labor rate/repair time when performed by a manufacturer's
authorized-service provider. Ultimately, labor reimbursement costs are at the
discretion of the manufacturer. After 1-year, the original retail purchaser is responsible
for all labor costs with no manufacturer reimbursement.
Manufacturer charges a 15% restocking fee for any items that are being returned to
stock. Items must be new, unused and free of damage. Only good for up to 1-year
(365 days). After 1-year, manufacturer does not accept the return of any item(s) for a
reimbursed price.
Authorized warranty replacement parts need to come directly from the manufacturer.
Use of any other parts will void warranty. Manufacturer does not reimburse for parts
used by the customer that were not supplied directly for the machine under warranty.
The warranty starts on the purchase date by the original purchaser, subject to proof
of purchase. Please immediately register your machine online at www.sandiaplastics.
com/registration.aspx or return this Machine Registration Card at the time of
purchase. If proof of purchase cannot be identified, the warranty start date is ninety
(90) days after the inventory stocking date at the distributor's warehouse.
Make a copy of this card for future reference.
© 2013 All Rights Reserved Sandia Products, Inc.
Sandia Products, Inc.
15571 Container Lane
Huntington Beach, CA 92649
Phone: 714-901-8400
Toll Free: 800-983-5834
Fax: 714-901-8404
www.sandiaplastics.com
Safety, Operation and Maintenance
Manual with Parts List
Important Information and Safety Instructions
Register your Machine at www.sandiaplastics.com/registration.aspx
Serial No:
© 2013 Copy Rights Reserved Sandia Products, Inc.
Please read before use!
1.5 HP, 115 Volt
REGISTER
YOUR
MACHINE
ONLINE!
Reliable Power
Fastest Pick-Up
Maximum Airflow
Innovative Design
Lightweight
HEPA Filtration