Setup Screen - 3Dlabs Oxygen GVX210 User Manual

The Setup screen lets you configure settings that are not specifically related to Direct3D or OpenGL.
If there are two monitors connected to the Oxygen GVX210 card, the Window Manager option
appears on the Setup screen. You can enable (check) and disable (uncheck) the 3Dlabs multi-monitor
Windows Manager, which requires a system restart.
If there are two monitors connected to the Oxygen GVX210 card, you use the Enable 2
Output option to enable or disable the second monitor. When you set or change the monitor
resolution, the selected resolution applies to both monitors. (See Configuring Multiple Monitors.)
You can enable (check) or disable (uncheck) the Taskbar based Configuration Manager with a mouse
click. The default setting is enabled. This application provides quick access to the main features of the
Control Panel. When the taskbar application is enabled, it appears on the taskbar (system tray) each
time the system is started. To remove the application from the taskbar, disable (uncheck) the option
and restart the system.
The Gamma Adjustment slider on the Setup screen lets you simultaneously adjust RGB color curves
and define the color output for your display. You can also enter a precise Gamma value, rather than
use the slider, when you know which value is appropriate for your monitor and ambient lighting
conditions.
12
Software Configuration
3Dlabs Oxygen GVX210 User's Guide
nd
Monitor