Detection; Signals Detected; Audio Alerts; Notice - Cobra SSR 80 Operating Instructions Manual

Main Icons

Detection

Your Detector
Intro Operation Customer Warranty

Signals Detected

Assistance
The tables on the following pages show you the types of Signals your detector will
detect, as well as the visual alerts it provides for each of them.

Audio Alerts

Secondary Icons
A distinctly different Alert tone is used for each type of signal detected (including
separate tones for each laser signal). For X, K and Ka band radar signals, the tones
will repeat faster as you approach the signal source. The repeat rate of the tones
gives you useful information about the signal detected. (See responding
to alerts on page 13.)

Notice

Visual Display

An indication of the type of signal
detected and, for radar signals, the signal
strength will appear in the UltraBright
Data Display. Radar signal strength will
be indicated by steady, flashing, or a
combination of steady and flashing
LEDs as shown in the signal strength
chart below.
Signal Strength Chart
Signal Strength = 1
Signal Strength = 2
(Weakest Signal)
X/K Ka L V/S X/K Ka
C
Signal Strength = 4 Signal Strength = 5 (Strongest Signal)
X/K Ka L V/S X/K Ka
C
10 English
SSR80_MANL.indd 10-11
NOTE: In This Manual
When steady,
X/K Ka L
the display will
be shown:
When flashing,
X/K Ka L
the display will
be shown:
Signal Strength = 3
L V/S X/K Ka L V/S
C C
L V/S
C
Main Icons
Detection
Your Detector
Intro Operation Customer
Assistance
Radar Signals and Visual Displays
Type of Signal
X Band Radar
Secondary Icons
K Band Radar
Ka Band Radar
Notice
X Signal Detected
Signal Strength = 1
X/K Ka L V/S
V/S
C
Laser Signals and Visual Displays
V/S
Type of Signal
LTI 20-20*
LTI Laser*
Kustom Signals Laser 340*
Kustom Signals Laser*
Stalker LIDAR*
Laser Atlanta SpeedLaser/Kustom Signals-ProLaser II*
* Your detector provides 360° detection of these signals.
Laser Signal Detected
X/K Ka L V/S
C
Warranty
Visual Display
X/K is Steady & lower LEDs
show signal strength
X/K is Steady & lower LEDs
show signal strength
Ka is Steady & lower LEDs
show signal strength
K Signal Detected Ka Signal Detected
Signal Strength = 3 Signal Strength = 5
X/K Ka L V/S X/K Ka L V/S
C
Visual Display
L is Steady
L is Steady
L is Steady
L is Steady
L is Steady
L is Steady
Nothing Comes Close to a Cobra
C
11
®
4/16/12 8:20 AM