Options - Electrolux TT 893 User Manual

Programme
AutoFlex 45°-70°
1) The pressure and the temperature of the water, the variations of the mains supply, the
options and the quantity of dishes can change the values.
Information for test institutes
For all the necessary information for test performance. send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the rating plate.

5. OPTIONS

Activate or deactivate the options
before the start of a programme.
You cannot activate or deactivate
the options while a programme
operates.
If one or more options are set,
make sure that the related indica-
tors are on before the programme
starts.
5.1 TimeSaver
This option increases the pressure and
the temperature of the water. The wash-
ing and drying phases are shorter. The to-
tal programme duration decreases by ap-
proximately 50%.
The washing results are the same as with
the normal programme duration. The dry-
ing results can decrease.
How to activate the TimeSaver option
1. Press TimeSaver. The related indica-
tor comes on. In the display you can
see the update of the programme du-
ration.
• If the option is not applicable to the
programme, the related indicator
flashes quickly 3 times and then
goes off.
5.2 Multitab
Activate this option only when you use the
combi detergent tablets.
This option deactivates the use of rinse
aid and salt. The related indicators stay
off.
The programme duration can increase.
1) Duration
(min)
40 - 150
Energy
(kWh)
0.6 - 1.4
How to activate the Multitab option
1. Press and hold, at the same time,
Rapido and AutoFlex until the Multi-
tab indicator comes on.
If you stop to use the combi
detergent tablets, before you start to
use separately detergent, rinse aid
and dishwasher salt, do these steps:
1. Set the water softener to the highest
level.
2. Make sure that the salt container and
the rinse aid dispenser are full.
3. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
4. Adjust the water softener to the water
hardness in your area.
5. Adjust the released quantity of rinse
aid.
5.3 Acoustic signals
The acoustic signals operate when the
appliance has a malfunction or when the
adjustment of the level of the water soft-
ener occurs. It is not possible to deacti-
vate these acoustic signals.
There is also an acoustic signal that oper-
ates when the programme is completed.
By default, this acoustic signal is off, but it
is possible to activate it.
How to activate the acoustic signal
for the end of programme
1. Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode, refer to "Set-
ting and starting a programme".
ENGLISH 7
Water
(l)
7 - 14