Download Print this page

Advertisement

Quick Links

User Manual - Istruzioni di montaggio e d'uso
EFT 800
UK
I

Advertisement

loading

Summary of Contents for Electrolux EFT 800

  • Page 1 User Manual - Istruzioni di montaggio e d’uso EFT 800...
  • Page 2: Table Of Contents

    Contents Safety instructions ............31 Description of the cooker hood ........32 Using the cooker hood ............. 32 Maintenance and cleaning ..........33 If the hood does not function ........... 34 Technical data ..............34 Installation ............... 34 Safety instructions The cooker hood may only be used in a private household and for normal cooking purposes.
  • Page 3: Description Of The Cooker Hood

    Description of the cooker hood The cooker hood 1 2 3 1. Light switch 2. Motor speed switch 3. Vapour catcher 4. Work light 5. Suction grid with grease filter Accessories The following are included with the cooker hood: • 1 hood canopy (C) complete with controls, lighting and fan motor.
  • Page 4: Using The Cooker Hood

    Using the cooker hood The control panel Best results are obtained by using low speed for normal conditions and high speed when smells and steam are more concentrated. 1 2 3 The control panel has two switches (Fig. 5): one controls the worktop illumination, the other controls the power to the motor and the three fan speeds.
  • Page 5: If The Hood Does Not Function

    Remember to save your purchase receipt and warranty card (only used in some countries). Technical data Model EFT 800 Size Height 152 mm Width 800 mm Depth...
  • Page 6: Installation

    Installation Unpacking Check that the cooker hood is not damaged. Transportation damages should immediately be reported to the transport company. Damages, faults and eventually missing parts should immediately be reported to the retailer. Dispose carefully of the packaging material so that it is out of the 70 cm 60 cm way of small children.
  • Page 7: Recirculation Mode

    Recirculation mode (with carbon filters) The air outlets A (Fig. 2) must be shut. • Open the suction grid (Fig. 6). • Check that the selection lever for extraction/ recirculation is in the position : F - recycle (Fig. 13). •...
  • Page 9 LI1RSB...