Advertisement
Components
1.
Rear Guard
2.
Control Switch
3.
Front Guard
4.
Fan Blade
5.
Base
6.
Foot
Operating your Fan
Assembly
Attach the feet to the fan
Fan control switch
The control switch positions are:
• 0 = OFF
•
•
• 1 = Low Speed
Check that the Fan control switch is set to the off position before plugging into the mains
supply.
Place the Fan on a dry, level and sturdy surface.
Plug the power cord into the socket, making sure the speed control is at OFF position.
To operate the fan, rotate the switch knob to the desired speed Low(1), Med(2), High(3).
Adjust tilt by moving the main housing on the stand to change to desire wind direction (i.e.
either upward or downward).
2 = Medium Speed
3 = High Speed
Advertisement
