USER MANUAL User Manual Warning Please follow safety instructions in this booklet to avoid seriously injuries or even death. Important Please read this manual carefully and follow the instructions. Only authorized people can use this Dryer. For any question please contact REKTÖR MAKİNA. Index Foreword Warning sings...
USER MANUAL Warring Sings Ror Repair and Please avoid Do not approach Do not run the Avoid Cable Maintenance C contact with with sharp and Jams Dryer with peeled all Technical liquids spike materials cables Service...
USER MANUAL Safety Rules Warring Please follow safety instructions in this booklet to avoid seriously injuries or even death. Please read safety instructions this manual carefully before operating the Dryer. Avoid dangerous situations. Before operationg the Dryer, always make safety inspections. Always inspect the working area of the Dryer. Use the Dryer only for its work purpose.
USER MANUAL Usage Instructions Basic Items The usage instruction sectioon, includes all operating instructions. It is the responsibility of the operator to follow the safety instructions. It is not safety to use the Dryer for purposes other than its purpose metioned herein.
USER MANUAL Pre Usage Inspection Process Basic Item A Pre-Usage Inspection, is a visual control made by the operator before operating the Dryer. Please check each item the list next page. In case of any changes comparing to factory defaults and / or defect caused by producer, make sure that the Dryer will not be operated.
USER MANUAL Install and Transport Install Fix the Dryer on a plain ground. To fix the Dryer on a plain ground, lock the two frontwheels. After all security inspections and plug power to a 380V grounded electric plug. Switch the Dryer on as shown in the image. Transport Make security precaution before transporting the Dryer.
USER MANUAL Usage and storage R 407c What to consider RM 55000 dryer heat pump works with compressed freon gas (Chlorofluorocarbon compound) closed curcuit heatexchanger. Damagin the heatexchangers during usage or storage may cause leaking freon gas (Chlorofluorocarbon compound). When hitting the heatexchanger with an sharp metal may cause compressed freon gas (Chlorofluorocarbon compound) leak.
USER MANUAL Working Life and Noise Declaration Working Life 1.Heat Pump 32.000 hours 2. Fan Engine When working life has of a spare part is over, it should be replaced with a new one in order to make the Dryer work again. Note: Sparepart replacement should only be done by an authorized technician.
USER MANUAL Technical Specifications It is the policy of Rektör Makine to improve its products continuously. Rektör Makine has the right to change the product specifications without prior notice. Rm 55.000 V 4.4 V 6.1 Dimension (cm) 76-80-125 76-80-125 Weight 180 Kg Energy Consuption 4.4 Kw/h...
USER MANUAL Maintenance Programme Daiy Maintenance Machines with air fitler, should be cleaned daily. The cleaning should be made with high pressure water or high pressure air. Monthly Maintenance Remove the air input fitler and clean the aluminium surfaces with high pressure water or vacuum cleaner.
USER MANUAL Troubleshooting Fault Detection : In case of a fault, check switch and the warning mechanisms in the Electric Panel. Shown in the images and explanations Detect the Fault. 1. The Fan Engines will be disable if the Fuse is switched off. To re-operate the Fan Engines switch the Fuse Switch to on.
USER MANUAL Drying Room Drying Room The Drying Room should not be bigger than 100m³ . For Rooms with more than 100m³ a second dryer is required. The volume of the room depends on the ceiling heigt. The ceiling should not be higher than 2,5m. For Example;...
USER MANUAL Fan and Heat Isolation External Fan Vortice 230/9 AR LLS 2 Fans with automatic blinds and air sealing feature should be mounted like shown in the drawing. The Fans should be positioned diagonally. Fans are operating connected to the dryer.
USER MANUAL Removable Parts During the maintenance of the Dryer, remove only the parts 3 and 9. All other parts should be removed by authorized technician. The order removing process is shown below. Do not operate the Dryer during the remove process. Unpulg the the macine if pugged in. Things to do when removing parts Remove the screws the held the parts together.