Customer Service 20600 Nordhoff Street Chatsworth CA 91311 www.gefen.com -- support@gefen.com Gefen reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice. TSE100 is a trademark of Gefen, Inc. Macintosh is a trade mark of Apple Computer Inc.
500 feet away from the location of your Macintosh computer. The TSE100 system consists of two units, the TSE100S Sender which resides next to the computer side and the TSE100R Receiver, which resides next to the extended monitor and keyboard.
4. When using the TSE100 with two monitors, one extended and one local, both monitors MUST be the same type. If the monitors are different, they will not initialize correctly.
TSE100S SENDER PANELS LAYOUT M ONITOR SETTINGS V IDEO IN LOCAL M ONITOR G EFEN S YSTEMS W OODLAND HILLS, CA 91367 M ADE IN U.S.A. VIDEO GREEN BLUE POWER LINK S YNC COMP HORIZ VER T...
FUNCTION DESCRIPTION Monitor Setting Monitor size and screen resolution switch setting. Computer / Video In DB-15 Male Connector which connects to the computer monitor port. Local Monitor In DB-15 female connector which connects the local monitor. Terminator Switch Terminate the video Input if local monitor is not used. Link RJ-11 Modular Jack which connects to the TSE100R (Receiver Unit).
TSE100R RECEIVER PANELS LAYOUT LINK POWER M ONITOR G EFEN S YSTEMS W OODLAND HILLS, CA 91367 M ADE IN U.S.A. S YNC VIDEO GREEN BLUE COMP HORIZ VER T...
FUNCTION DESCRIPTION Monitor DB-15 female connector which connects the extended monitor. Link RJ-11 modular Jack which connects to a TSE100S (Sender Unit). Mini din sub connector which connects the extended ADB port. (For keyboard, Mouse and Trackball). Power On Light Power on status indicates that the unit is plugged in.
Note: The following configurations can be used for setting up the most common monitor sizes. If you can't find your specific monitor setting, Call or fax Gefen Systems for assistance. The dip switches are located on the front Panel of the TSE100S unit.
Page 16
MONITOR DIP SWITCH SETTINGS 4. Dip Switches 1 & 2 ON Use for MultiScan 14" Monitors. Use Horiz. and Vert. Sync. only. 5. Dip Switch 3 ON Use for RGB 17" Monitor. Use Horiz. and Vert. Sync. only. 6. Dip Switch 4 ON Use for RGB 19"...
If equipment fails because of such defects and Gefen Systems is notified within one (1) year from the date of shipment, Gefen System will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifications.
Page 18
This document was created with Win2PDF available at http://www.daneprairie.com. The unregistered version of Win2PDF is for evaluation or non-commercial use only.
Need help?
Do you have a question about the TSE100 and is the answer not in the manual?
Questions and answers