Advertisement
USB-20V
Installation
Thank you for purchasing ABIT USB-20V USB2.0 High-Speed PCI Host Card. The purpose
of this guide is give you a quick introduction to installing this card properly.
USB-20V Specifications
Features:
Compliant with Universal Serial Bus (USB) Specification Revision 2.0 and 1.1
Compliant with PCI specification revision 2.2
High-Speed 480 Mb/sec data transfer speed
Provides 4 external downstream Type-A USB ports, supports all USB speeds
Supports Plug & Play specification
Links up to 127 Devices
Installation CD with USB 2.0 drivers for Windows
®
Windows
2000, and Windows
4200-0269-02
Quick
Guide
®
98SE, Windows
®
XP
Hardware Specification:
USB Host Controller
VIA VT6202 USB 2.0 Host Controller
Bus-System
32-bit PCI 2.2 standard
I/O Interface
4 external Type-A USB ports
Operating Systems Supported:
®
•
Windows
®
•
Windows
®
•
Windows
®
•
Windows
USB-20V PCI Card Layout Diagram
4×External Ports
®
Me,
98SE
ME
2000
XP
PCI Interface
Ver. 1.01
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Abit USB-20V
Summary of Contents for Abit USB-20V
- Page 1 Windows 98SE ® • Windows ® • Thank you for purchasing ABIT USB-20V USB2.0 High-Speed PCI Host Card. The purpose Windows 2000 ® • of this guide is give you a quick introduction to installing this card properly. Windows USB-20V PCI Card Layout Diagram...
-
Page 2: Connecting Usb Devices
4. When you handle the card, be careful not to touch any components on the circuit board or the gold-edged connector. 5. Hold the card along the top corners and guide it into the slot. When the USB-20V card reaches the slot on the motherboard, push the card in firmly to insert it fully.
Need help?
Do you have a question about the USB-20V and is the answer not in the manual?
Questions and answers