Abit SI-2NS441 Series User Manual page 43

BIOS Setup
[Instant-Off]: Pressing and then releasing the power button at once will immediately
power off the system.
CPU THRM-Throttling
This item controls the CPU speed by cutting down its regular power to a percentage
during the STR (Suspend To RAM) state.
Wake-Up by PME# of PCI
When set to [Enabled], access to the onboard LAN or a PCI card such as a modem or
LAN card will cause the system to wake up. The PCI card must support the wake up
function.
WakeUp by Alarm
When set to [Enabled], you can set the date and time you would like the Soft-Off PC
to power-on in the "Date (of Month) Alarm" and "Time (hh:mm:ss) Alarm" items.
However, if the system is being accessed by incoming calls or the network (Resume
On Ring/LAN) prior to the date and time set in these items, the system will give
priority to the incoming calls or network instead.
Date (of Month) Alarm
[0]: This option power-on the system everyday according to the time set in the "Time
(hh:mm:ss) Alarm" item.
[1-31]: This option selects a date you would like the system to power-on. The system
will power-on on the date set, and the time set in the "Time (hh:mm:ss) Alarm" item.
Resume Time (hh:mm:ss)
This item sets the time you would like the system to power-on.
Restore On AC Power Loss
This item selects the system action after an AC power failure.
[Power Off]: When power returns after an AC power failure, the system's power
remains off. You must press the Power button to power-on the system.
[Power On]: When power returns after an AC power failure, the system's power will
be powered on automatically.
[Last State]: When power returns after an AC power failure, the system will return to
the state where you left off before power failure occurs. If the system's power is off
when AC power failure occurs, it will remain off when power returns. If the system's
power is on when AC power failure occurs, the system will power-on when power
returns.
3-17
User's Manual