Advertisement
Advertisement
Table of Contents
Summary of Contents for Transcat 24 VDC
- Page 1 24 VDC Loop Power Supply Operation Manual ...
- Page 2 INTRODUCTION The 24VDC Loop Power Supply (24VDCLOOP) is a portable battery powered loop power supply. It is ideal for sites where power is unavailable. The low noise regulated output is suitable for use with smart transmitters. Power is automatically turned off when load is removed, preserving battery life.
-
Page 3: Battery Replacement
Batteries The 24VDCLOOP uses 2 (two) AA batteries. Recommended batteries are Lithium (non- rechargeable), Alkaline, or NiMH (rechargeable). To avoid damage by over-discharging, rechargeable batteries should be removed when the Yellow Low Battery LED illuminates. Non-Rechargeable batteries may continue to be used until the Red Fault LED illuminates, at which time the output voltage will have fallen below 24 V. - Page 4 Electrical Specifications / Mechanical Specifications Output Voltage _ _ _ _ _ _ _ _ _ _ _ _ _ 24 VDC ± 1% Output Voltage Ripple _ _ _ _ _ _ _ _ < 14 mV rms Load...
- Page 5 You will receive instructions for returning the device to Transcat. Transcat will, at our option, repair or replace the defective device free of charge and the device will be returned, transporta- tion prepaid.
Need help?
Do you have a question about the 24 VDC and is the answer not in the manual?
Questions and answers