View Media - Philips PFL30x7D User Manual

View media

What you can do
You can play videos, photos, and music on
your TV from:

Your computer connected through the
home network (For models with
network connector only)

A USB device connected to the TV
Play files from computer
What you need
Available on certain models only.

A wired or wireless home network,
connected with a Universal Plug and
Play (uPnP) router.

Philips wireless USB adapter (PTA127)
or a LAN cable that connects your TV
to your home network.

A media server program running on
your computer

Appropriate settings on your computer
firewall to allow you to run the media
server program
Set up the network
1. Connect your TV and the computer to
the same home network. See Connect your
TV > Network and the Internet (Page 42).
2. Switch on your computer and the router.
Note:
If the apparatus does not return to DLNA
mode due to external electrical disturbances
(e.g. electrostatic discharge), user
intervention is required.
Set up media sharing
1. Install a media server program on your
computer to share media files. Some of the
available media server programs are as
follows:

For PC: Windows Media Player 11 (or
higher) or TVersity

For Mac: Twonky
2. Switch on media sharing on your
computer using the media server. For more
information on how to set up the media
server, refer to the website of the media
server.
Play files
1. Press .
2. Select [Browse network], then press OK.
If the network installation starts, follow the
onscreen instructions.
3. Select a file from the content browser,
then press OK to start play.
4. Press the Play buttons on the remote
control to control play.
Play files from USB
If you have photos, videos or music files on a
USB storage device, you can play the files on
TV.
Caution:

TP Vision is not responsible if the USB
storage device is not supported, nor is it
responsible for damage or loss of data
in the device.

Do not overload the USB port. If you
connect a USB storage device that
consumes more than 500mA power,
make sure that it is connected to its
own external power supply.
View USB contents
1. Connect the USB device to the USB
connector on the TV.
, select [Browse USB], then press
2. Press
OK.
3. Select a file from the content browser,
then press OK to start play.
4. Press the Play buttons on the remote
control to control play. See Use your TV >
View Media > Play options.
EN 17