DESCRIPTION SETTING UP - Connecting the CLA 1 - Select your phone - Select the working mode (Handset / headset) - How to use the handset - How to use the earpiece - How to use the headset (option) TROUBLE SHOOTING GUARANTEE DESCRIPTION REGLAGES...
DESCRIPTION DESCRIPTION Earpiece (5) Headset socket (1) Base cord connection (4) (*) Headset/ Handset select switch (2) Handset socket (3) Headset hook/Rack mounting Hook/Rack slide for mounting (insert up to listen «clic») Hook/Rack Earpiece polarity CLB/CL switch (7) switch (6) (*) Classified TNV-3 according to EN60950 standard.
Page 4
DESCRIPTION View of the CLA 1 after Hook/Rack mounted: View of the CLA 1 with a headset on Hook/Rack: Note: Headset is an option and is not supplied with the CLA 1. Geemarc headset reference : HEADSCL_BLK...
CLA 1 top to select the handset by setting the switch to the position and the headset by setting the switch to the The CLA 1 is now ready to use. Note: The CLA 1 functionality are only guaranted with Geemarc telephones CL 50 to CL 500 range.
When you receive a call, lift your handset and place it near the phone base, make sure that the switch (2) is set to . Then speak and listen your correspondent with your headset (Geemarc headset ref: HEADSCL_BLK) . At the end of the call replace the handset in the phone cradle.
- Crackling into the headset or earpiece: check the switch (7) located under the CLA 1. - Nothing happens after following the instructions above: check your telephone and the network connection. For product support and help visit our website at www.geemarc.com telephone 01707 384438 or fax 01707 372529...
Radio and Telecommunications Terminal Equipment Directive 1999/5/EEC and in particular article 3 section 1a, 1b and section 3. For product support and help visit our website at www.geemarc.com telephone 01707 384438 or fax 01707 372529...
DESCRIPTION Prise casque (1) Interrupteur de sélection Casque/Combiné (2) Montage du support casque Support casque Interrupteur polarité casque (7) (*) Classée TRT-3 selon la norme EN60950 DESCRIPTION Ecouteur (5) Cordon de connection à la base (4) (*) Prise combiné (3) Glissière de montage du support (insérer jusqu’au «clic»)
Page 10
DESCRIPTION Vue du CLA 1 avec son support casque: Vue du CLA 1avec un casque sur son support: Note: Le casque est une option et n’est pas fourni avec le CLA 1. Référence casque Geemarc : HEADSCL_BLK...
REGLAGES REGLAGES ET UTILISATION Connecter le CLA 1 Pour connecter le CLA 1 à votre téléphone suivez simplement les instructions suivantes. Aidez-vous des photos page 3 pour effec- tuer les connections. 1 - Déconnectez le combiné de la base de votre téléphone. 2 - Connectez le petit cordon du CLA 1 (4) sur la prise combiné...
Vérifiez que l’interrupteur (2) est placé sur la position . Vous pouvez parler et écouter votre correspondant avec le casque (référence casque Geemarc: HEADSCL_BLK). A la fin de la conversation, replacez simple- ment le combiné sur son support.
TEL. SERVICE APRES VENTE : Pour tout renseignement technique ou toute commande visitez notre site web sur www.geemarc.com. (7) sous le CLA 1. 03 28 58 75 99 Parc d’Activités du Basroch 2, rue Galilée...
(nor- mes TBR21/37/38). TEL. SERVICE APRES VENTE : 03 28 58 75 99 Pour tout renseignement technique ou toute commande visitez notre site web sur www.geemarc.com. Parc d’Activités du Basroch 2, rue Galilée 59760 Grande Synthe UGCLA 1Ed-01...
Need help?
Do you have a question about the Extra Earpiece CLA 1 and is the answer not in the manual?
Questions and answers