1.Introduction of Product 1.1 Preface The EAGET M8 is a high definition multimedia player with network, download, DVB-T and TV record functions! You can watch movies in the highest resolution(1080P) and in all common formats on your television or home cinema system – including the corresponding multi-channel sound (DTS, Dolby Digital).
Page 3
·Input the A/V signal from other device, then browse or recording it by this player. Video Recording ·supports one key recording and scheduled recording, and save as MPEG-2 (.mpg,or .ts)format; ·supports time shifting function. Multimedia Playback ·Supports major audio, video and image file formats (1080p HD video decoding) ·Movie format: AVI/MKV/TS/MPG/MP4/MOV/VOB/ISO/IFO/DAT/WMV/RM/RMVB ·Music format: MP3/OGG/WMA/WAV/AAC/FLAC ·Photo format: HD JPEG/BMP/GIF/TIF/PNG...
1.3 Packing list Before you make use of the product, please check whether the color box packing has the following parts. If there is shortage, please contact the dealer from who you buy the product in time to guarantee your rights and interests. Item Quantity media player...
Page 5
may cause undesired operation. 1.4.4 Repair If the player has a problem, you should take it to an appointed repair center and let the specialists do the repair, never repair the player yourself, you might damage the player or endanger yourself or your data. 1.4.5 Disposing of the Player When you dispose of the player, be sure to dispose it appropriately.
2. Connection 2.1 Connecting the Power Supply (1) Follow the picture and connect the AC adaptor to the player’s DC IN jack; (2) Follow the picture and plug in the AC adaptor to the power outlet. 2.2 A/V input (1) Follow the picture and plug in the 3 color connector to the player’s A/V in jack; (2) Follow the picture and plug in the 3 color connector to the other device’s(eg:DVB,STB ect.) A/V out jack.
Page 7
2.4 Y/Pb/Pr Component out (1) Follow the picture and plug in the one connector to the player’s Y/Pb/Pr jack; (2) Follow the picture and plug in the 3 color connector to the TV’s Y/Pb/Pr jack. Audio Connection while using Y/Pb/Pr Video out: Helpful tips:As only the video signals and no audio signals are outputted in Y/PB/PR mode, so please make audio output when using Y/PB/PR mode.
Helpful tips: To use the power amplifier to output the audio information, please set OUTPUT in settings as SPDIF LPCM”. 2.6 HDMI out (1) Follow the picture and plug one connector on your HDMI cable to the player’s HDMI jack; (2) Follow the picture and plug the other connector on your HDMI cable to the TV’s HDMI jack.
Helpful tips: the Wireless Network Card for USB is an optional and not all wireless Network cards sold on the market can be used for this player. Please consult with the sales when you wish to make the best use of this product. 2.9 Connecting a USB Device (Include:U-Disk,removable HDD, USB DVD ROM ect.) (1) Make sure the player is powered on;...
Page 10
2.11 Connecting to a PC (1) Make sure the player is powered on; (2) Plug in the squarish connector of the USB cable to this player’s USB DEVICE port; (3) Plug in the rectangular connector of the USB cable to computer. 2.12 ANT IN (1) Connected the power supply of coaxial cable for wire TV.
3. About the player 3.1 Remote Control 1. Remote Indicator 2. STAND BY 3. MUTE 4. REC 5. TV System 6. HOME 7. BROWSER 8. EJECT 9. Number Buttons 10. REPEAT 11. GOTO 12. STOP 13. PLAY 14. FR/FF 15. PREVIOUS 16.
Page 12
Button Description: Buttons FUNCTION Remote indicator. Remote Indicator STAND BY Press to enter standby mode or wake up. Turn on / off the sound. Mute Start or pause REC, retap will select the length of the video.( One key record OTR,youcan select OTR30 MIN. / 60 MIN. / 90 MIN. / 120 MIN. / 180 MIN.
files or folders. Zoom in movies(2x,3x,4x,8x,1x) or pictures (2x,4x,8x,16x,fit). Zoom Subtitle Press to set subtitle options. Press to select an audio track. Audio Select the video source or DTV for the recording. Source Press to open Teletext OSD if it is available in the broadcasted stream TELETEXT of Digital Terrestrial TV.
3.3 Back view 1. DC-IN 2. USB DEVICE 3. LAN/USB HOST 4. HDMI jack 5. Power Switch 6. Coaxial/ Optical fiber 7.AV IN/AV OUT 8. YPbPr Port 9. ANT IN/AT OUT 10. Cooling FAN Interface Description: Item Operation instruction DC-IN Power input:DC 12V.
3.4 Side view 1. SD/MMC/MS Card slot 2. Internal HDD Drawer Interface Description: Item Operation instruction SD/MMC/MS card slot Plug in SD/MMC/MS card by this jack. Internal HDD Drawer Install the 3.5” SATA hard drive by this drawer...
Page 16
3.5 Installation of Hard Disk: (schematic diagram):...
4. Power On / Off 4.1 Power On After connecting the power cable and Video cable, then switch on, the player will soon enter into the home menu. 4.2 Power Off Press the power button on the front panel or press the standby key on the remote controller,the player will soon enter standby mode, and the power indicator will turn red.
1X,3/4X,1/2X,1/4X,1/8X,1/16X) Set subtitle options. SUBTITLE Select an audio track while watching BivX AUDIO video or DVD with multiple audio tracks. Zoom in the image. ZOOM (Zoom ratio:2X,3X,4X,8X,1X) Set repeat options: repeat title,repeat REPEAT all,close repeat. Hide or display the information bar during Dislpay playback.
(1.5x,2X,4X,8X,16X,32X) (1.5x,2X,4X,8X,16X,32X) FR/FF Press repeatedly to select the speed. up/down Select the previous or next file. Hide or display the information bar during Dislpay playback. Mute Turn on/off the sound. Add or decrease volume. vol+/- Helpful tips: In this application, the player will display all supported music files. 5.3 Browsing Photos Press the Left/Right keys on the remote controller to select photo from the main menu above the screen;...
1. It will automatically start the slide mode when the picture is displayed in full screen; 2. You can also preview pictures when listening to your favorite music; 3. All supported picture files will be displayed in this application. 5.4 Browsing All In this mode, all folders and supported contents (music, photos, and movies) will be displayed.
Page 21
Press the option button and a popup menu appears. Select Add option and press Enter key access. After add is selected, you will enter IP setting window. Press Enter key to set the Net User ID, Net Password, and Specific File Server IP. Select OK to confirm, Cancel to cancel, and Simple/Detail to switch between simple and advanced option.
Page 22
5.5.2 Browsing through My_Neighbors The system will automatically search the computer that has been installed with Transcode. If the computer is found, the player will display the computer name in the list for users’ choice. Transcode Server in PC Transcode server is a medial transition software. It need installed on PC. And it is a communicate bridge to connect Net Media Player and PC.
Page 23
2)Net share dialog: Click Net share dialog and select the shared folder on the local PC. Press "Add" to add the shared folder, press the "delete" to delete the selected folder. The shared contents of the folder you can be browsed under the My_Neighbors. Such as you add a folder named test movie on the local computer, you will browse the test movie folder under the My_Neighbors of the player's.And the shared folder will appear a shared symbol...
Page 24
3)Setting: In the setting interface, select the Auto Run on system startup option, click Apply to confirm, the software will running automatically when the computer boots up. 4)Event log: In the Event log interface to display PC and Media player communication information. 5)About: In the about interface to view the software version.
Page 25
5.5.3 WORKGROUP The system will automatically search the network computer. If the computer is found, the player will display the computer name in the list for users’ choice. WORKGROUP Instructions of Operations You can choose the workgroup which your PC belongs to from the workgroup list, find your PC name, and press the Enter key to confirm.
Page 26
version, then the computer will get the UPNP agreement automatically. After Window Media Play 11 has been installed, the steps of starting UPNP can be found in the following: 1) Start Window Media Play 11 and select library -> option. 2) Select library in option column.
share is successful. Then you can enter the system and select UPNP in Browser for access. 5.8 Play list With Play List function, you can add your favorite media files into the list to play. (music,movie,photo and all surported files.) 5.8.1 Add Music to the Play List:...
save the music and the photos in the same folder,and set the background music as the floder,when you browing it will play the music in folder. 5.8.2 Delete a file from the playlist: If you wish to delete a file from the playlist, press the Select button to select, and then press the Confirm button to confirm.
Use the navigation key to input,press OK to confirm. 6.2 Delete the files Delete the files Instructions of Operations Press the Up/Down keys to select the files which you want to delete. Press the Option key to select delete and press Enter key to confirm. Helpful tips: The files in Play list will not be supported to rename and delete.
Page 30
Steps: Step 1: Select the source and destination device Press Up/ Down keys to select the source and destination device. Press the Right key to execute the next step. Step 2: Select the source files In the source device, select the files which you want to copy.
Page 31
8. Audio and video in mode Select the audio and video in mode to enter on the main interface. 8.1 DTV Pressed the source key on remote control to switch DTV from Vedio 1. In this application, you need to install a digital TV module,then scanning for DTV programming in setting menu, and select auto scan or manual scan in channel scan on setup menu to scan the channels,then turn to DTV menu on the home page to play it.
Page 32
schedule record the programs for the future week. According to the screen prompt, press the Previous and next key to select channels, press the left/right key to choose the date. press up and down to select programs which will be recorded. 8.1.3 Subtitle List Menu Press the subtitle key when watching DVB-T TV programs, the Subtitle List menu will be displayed.
Page 33
automatically in the cache of intenal HDD,You need to press PLAY button to resume the program. And you can pause, fast forward, rewind the program until you press the STOP button. Permanent timeshift: When the permanent function is on, and you enter into the DVT or AV IN interface,the program will automatically be saved, and you can pause, fast forward, rewind the program just like your play the files on your local hard drive immediately.
Page 34
8.4.1 Edit 8.4.1.1 Add a New Schedule Press the left / right button on the remote control to select the Edit tab from the menu bar. Select Add a New Schedule and press the enter button. The schedule setting screen appears. Use the left/right button on the remote control to move between fields and press the up / down button to adjust each setting.
Page 35
bar. Select the schedule you want to delete and press the Enter button. A confirmation message appears. Select CANCEL, Delete the selected schedule, or Delete all schedules. Press the enter button to confirm. 8.4.3 Status Change the selected schedule status: Press the left/right key on the remote control to select the Status tab from the menu bar.
8.4.3.2 When the source is from DTV. Select Enable the selected schedule or Pause the selected schedule. Press the Enter button to confirm. 8.4.4 Viewing Recording History Press the left/right button on the remote control to select the History tab from the menu bar.
Page 37
Select to scan for available TV channels. a. AUTO SCAN In AUTO SCAN mode, the system will automatically scan for available TV channels. b.MANUAL SCAN In MANUAL SCAN mode, you can select the CH name, Bandwidth, and Input Frequency. Use the navigational and numerical key on the remote control to select or input.
Page 38
Delete: Select one channel and press enter to confirm,then select the delete dialog box,choose yes or no to delete the channel. 9.2 Changing the Audio Settings Use this menu to configure audio settings. 9.2.1 Night Mode: Choose between Off /On/Comfort. If the option is turned on, the audio output volume will be decreased to make you more comfortable.
Video Settings Instructions of Operations Pan Scan 4:3: Display a wide picture on the entire screen and cuts off the redundant portions. Select when a standard 4:3 TV is connected. Letter Box 4:3: Display a wide picture with two black borders on the top and bottom of 4:3 screen.
Page 40
space. The other settings reduce recording quality sequentially but also require less storage space. When the permanent function is on, the program will record Permanent automatically, and you can pause, fast forward, rewind the program timeshift just like your play the files on your hard drive Immediately. Select to set device to restore the recorded files(HDD,USB).
Page 41
Use the Navigation and Number keys on the remote controller to input the IP address. Press Confirm key to confirm. 9.5.2. Wireless Setup Wireless Setup 1). Selecting a connection profile This player can store up to three wireless network connections. Press ENTER to go to next step, press RETURN to cancel, and press PLAY to connect.
Page 42
Step1: Get SSID Name After connection way of AP is selected, press the enter key to enter and get SSID setting page. The system will automatically search the surrounding available network resources. After a while, the system will list the found SSID in table for users’ choice. Through this table, users can select the wireless base station they want.
Page 43
Step3: After set up ok, the system will display the set result in Test OK and Show Net info interface. The information of wireless base station is recorded here, such as SSID, safety mode, IP address, subnet mask and preinstall gateway. Press the enter key to complete the setting.
Page 44
and Show Net info interface. The information of Ad-Hoc is recorded here, such as SSID, safety mode, IP address, subnet mask and preinstall gateway. Press the enter key to complete the setting. If the IP can not be correctly obtained, that the setting must be repeated. 9.5.2.3 WPS(AP)...
Page 45
PPPoE Note: When the wire/wireless/ network are connected at the same time,and obtained the different IP address, on the front of the valid network there is a mark as*. 9.6 Change the System Settings Use this menu to configure system settings. Operating Methods: Press the Left/Right keys to select system in the menu above the screen.
Page 46
DTV) to set the system time. Select whether to classify the grade of the movie or the setting of the Parental Control grade. Default password: 0000 Automatic play of DVD. R/RW Auto-Play Press up/down key to select and press the enter key for confirmation. During play back DVD files, you can select the different visual angles to watch Angle Mark DVD.
Page 47
When are in formatting,it will Install the extension package such as SAMBA,btpd, unicgi automatically,and it also can install it in setup-system upgrade-extension package upgrade,press confirm key to start,after success,then you can use you player normally. The formatting procedure will be finished within a few minutes. And then you can use the hard disk properly on the player.
Page 48
Movie preview Select whether or not to preview the movies before playing it. 10.IMS This is the third-party service and may be shut down because of the policy issues. Press left/right key to selelcted,press confirm key to access into IMS interface. In IMS interface, you can go online to browse,there are internet channels,search video,media library,sina,weather five items to browse.
Page 49
Note: if the settings -> System -> Login control is set to on, the password to take effect. The default user name is' admin ', default password is '123'. If the login control is off, it will not need to enter a password and come into the main interface directly, the main interface showing as follows: 11.1.2 Account Management At Home page, select “Account Management”...
Page 50
Login password can be modified at here. Please setting password according your favorite.Please input password twice and click “Enter” to confirm. When modify is succeed, press “Confirm” at the pop menu and return. Please note the User name cannot be changed.
Page 51
11.1.5 Add new torrent Click Add new torrent on the BitTorrent Download page. Click Browse to upload a torrent file, and click Yes to confirm. 11.1.6 Managing the Downloads The BitTorrent Download page also allows you to start, stop, delete torrents, and set priorities for torrents, as well as view the status of current torrents.
Page 52
Click Start to begin download. Click Stop to stop download. Click Delete to delete the selected torrent. Click Refresh to refresh the current status. Click Down arrow to decrease the priority for the selected torrent. Click Up arrow to increase the priority for the selected torrent. 11.1.7 Settings Click Setting on the BitTorrent Download page to enter the BitTorrent Setting page.
11.2 Network Attached Storage This product may serve as the network storage device (NAS, Network-Attached Storage). Put it into your family network to make it convenient for you to store and manage the data on LAN. Before using this function, please make sure the network (Ethernet or wireless network) has been connected correctly.
The upgrade interface will be displayed on the screen shown as below: The whole installation will last for approximately 2 minutes; please wait for it patiently. The player will be restarted after installation. Then you can use all functions of this player normally and experience the unequalled multimedia enjoyment.
Page 55
vii) WMV9(VC-1) viii) RealNetworks (RM/RMVB) 8/9/10, surport for720p Audio codes supported: ix) MP2/3, OGG Vorbis,FLAC, WMA Standard (DRM, and Advanced Profile not supported), PCM, LPCM, AAC,RA Subtitle formats supported: SRT, SMI, SSA,SUB, IDX+SUB Network 10/100Mbps Auto-Negotiation Ethernet Ethernet/ IEEE 802.11b/g/n WLAN, at maximum 300Mbps (supported by Wireless optional WLAN USB Adapter) network...
Page 56
computer by the USB connection. Windows and Macintosh often write extra files to the hard disk such as finder.def or System volume info. These are normal and will not do any harm to the player. Question 4: I used my player to transfer files back and forth between different computers. Will defragmenting the player hard disk do any harm to it? Answer: Defragmenting the player hard disk may be useful after having transferred many files...
Page 57
Question 7: During power on, why does the TV will have a short flashing, blue screen or screensaver? Answer: This is normal, when the system initializes, it will setup the corresponding parameters so it can output the correct video signal to the TV, during the initializing time, the TV will receive incorrect signals or the signals will not be stable and will cause the TV screen to flash, some TV’s will treat this as no signal, and will display a blue screen or screensaver.
13.3 Copyrights and Trademarks Copyrights The Company reserves all patent, trademark, copyright and other intellectual property rights, And the content of User manual can not be reprinted without permission. The software, music or movies owns the copyright are protected by the relevant laws, Users who use this player to copy of such content need to bear the related legal responsibility.
Need help?
Do you have a question about the M8 and is the answer not in the manual?
Questions and answers