Table of Contents
Advertisement
7.6 Levelling
7.7 Door reversibility
1
3
2
4
2
1
When placing the appliance ensure that it
stands level. If necessary adjust the feet
using the adjustment spanner supplied.
To change the opening direction of the
door, do these steps:
(Example for right hinge performance)
• Remove the plug from the power.
• Remove the ventilation grill. Remove
the upper filling and install it on the op-
posite side of the grill.
• Remove the pedal hole cover and install
it on the opposite side of the grill.
• Lay down the appliance back side
down on a wooden support.
• Unscrew the hinge (1) and remove the
cover plate (2) and the support (3).
• Remove the cover (4) on the opposite
side and install the support (3), the cov-
er plate (2) and the hinge (1). Install the
cover (4) on the opposite side.
• Disconnect the cable (1) which comes
from the door.
• Unscrew the cable holder (2).
• Change the position of the cable in the
cable holder.
ENGLISH
15
Advertisement
Table of Contents
