Connecting Power; Disconnecting Power; Replacing The Power Supply - NetWorth Micro 100-TX24 User Manual

Installing the Repeater

Connecting Power

Notes:
— The power source should be near the repeater and easily accessible.
— The Micro 100-TX24 repeater has no power switch. Connecting the repeater to the power
source via the power cable's three-pronged plug powers up the repeater.

Disconnecting Power

Replacing the Power Supply

PWR B
Female Power
Cable Connector
Figure 3-6: Connecting the Power Cable
PWR A
Connecting Power
PWR A
3 - 5