Electrolux EW 1062 W Instruction Booklet page 21

Unsatisfactory washing results:
n
The door will not open:
n
Spinning starts late or the
n
machine does not spin:
The machine makes an unusual
n
noise:
Water is not visible in the
n
machine:
The machine does not dry or the
n
laundry is not dry enough:
If you are unable to identify or solve the
problem, contact our service centre. Before
telephoning, make a note of the model, serial
number and purchase date of your machine: the
Service Centre will require this information.
Too little detergent or unsuitable detergent
n
has been used.
Stubborn stains have not been treated prior
n
to washing.
The correct temperature and programme was
n
not selected.
Excessive laundry load.
n
The programme is still running.
n
The door lock has not been released.
n
There is water in the drum (a programme with
n
the option has been selected).
n The electronic unbalance detection device
has cut in because the laundry is not evenly
distributed in the drum. The laundry is
redistributed by reverse rotation of the drum.
This may happen several times before the
unbalance disappears and normal spinning
can resume. If, after 10 minutes, the laundry
is still not evenly distributed in the drum, the
machine will not spin. In this case,
redistribute the load manually and reselect
the spin programme.
The machine is fitted with a commutator
n
motor which makes an unusual noise
compared with other traditional machines.
This motor enables a softer start to the spin
and controls the increase in spin speed
better. In this way, machine performance is
improved.
The machine, which is the result of modern
n
technology, runs in a very economical way
with low water consumption. Performance is
nevertheless excellent.
The drying time has not been selected.
n
The tap is closed.
n
The drain filter is blocked.
n
A suitable drying time in the correct sector
n
has not been selected.
The drum is overloaded.
n
The button has been depressed.
n
Mod. ..........
Prod. No. ...........
Ser. No. .........
P0042
21