BIOS Setup
3-9
Init Display First:
This item selects to initialize AGP or PCI Slot first when the system boots.
[AGP]: When the system boots, it will first initialize AGP.
[PCI Slot]: When the system boots, it will first initialize PCI.
AGP Data Transfer Rate:
This item allows you to select the data transfer rate of AGP device. A higher rate delivers faster and better
graphics to your system. Make sure your graphics card supports the mode you select.
Differential Current:
This item selects the clock's internal reference current ratio.
3-5. Integrated Peripherals
OnChip IDE Device(s):
Click <Enter> key to enter its submenu:
OnChip IDE-1 Controller:
This item allows you to enable or disable the primary and secondary IDE controller. Select [Disabled] if
you want to add a different hard drive controller.
User's Manual