Use; Control Panel; To Start The Freezer And Set The Correct Temperature - Electrolux EUS23900 User Manual

USE

BEFORE USE
Position and clean the cabinet as
explained in the section "Installation".

Control Panel

+
ON/OFF
A B
A. Freezer power switch
Switches the freezer on and off.
B. Temperature adjustment
button/thermostat
Used to set the temperature in the
freezer.
C. Temperature display
Shows the highest temperature inside
the freezer.
First switch on
To start the freezer and set the correct
temperature
Switching on:
Switch on the freezer by pressing the
power switch.
--18
+
ON/OFF
The alarm sounds if the temperature
inside the freezer reaches room
temperature. Turn off the alarm by
pressing the switch-off button.
7
--18
-
C B
-
ALARM OFF
Before in sertin g th e power plu g in to th e
outlet and switching on the cabinet for
the first time, leave it standing upright
for about 4 hours. Otherwise the
compressor may su stain damage. Th i s
time will allow the oil sufficient time to
return to the compressor.
ALARM OFF
D E F G
D. Yellow indicator lamp
Lights when Fast Freeze is operating.
E. FAST FREEZE button
Used to switch the Fast Freeze feature
on and off.
F. Red warning lamp
Flashes when one of the alarms in the
cabinet has been triggered.
G. Alarm shut-off button
Used to turn the audible alarm off.
--20
+
ON/OFF
Setting the temperature
Press the buttons until the desired
temperature blinks on the temperature
display. (The temperature can be set
between -15°C and -24°C.)
"+" increases the temperature.
"-" decreases the temperature.
--18
+
ON/OFF
-
ALARM OFF
-
ALARM OFF