Changing The Opening Direction Of The Doors; Instructions For Totally Built-In - AEG Electrolux ER 8133 I Instruction Manual

The appliance is supplied with the right
door opening. To change the opening
direction of the door proceed as in the
following instructions before installing it.
1. Unscrew the upper pin and remove the spacer
2. Remove the upper door
3. Unscrew the middle hinge and the brackets and
refit them on the opposite side
4. Refit the upper door, the upper pin and the
spacer on the opposite side
5. Unscrew the lower pin and remove the spacer
and refit them on the opposite side
I nstructions for totally built-
in appliances
Dimensions of the recess
Height 1780 mm
Depth 550 mm
Width 560 mm
For safety reasons, minimum ventilation must be as
shown in Fig. Attention: keep ventilation
openings clear of obstruction.
I nstructions for totally built-in appliances
Door reversibility
min.
50 mm
2
200 cm
D567
min.
2
cm 200
57