Advertisement
Quick Links
Advertisement
Summary of Contents for Volvo Penta Volvo Penta
- Page 1 Volvo Penta Quality Line Marine Water Heaters Owners Manual...
-
Page 2: Mounting Instructions
Water Heater. A choice that will help you bring operating or ser vicing the Water Heater. If anything is out the best in boating pleasure. To give you unclear, please contact your Volvo Penta dealer for the best benefit of the product and to facilitate assistance. -
Page 3: Electrical Connection
English Fresh water plumbing connection Electrical connection For a better understanding of these instructions, WARNING! Before removing the black please refer to the “plumbing connection diagram” plastic cap, be sure to turn off the electrical supply. found at the back of the booklet. WARNING! Follow the norms and standards 1. - Page 4 2. With engines cooled with sea water, water coil is approximately the following: should be drawn at its hottest point after it has QL 20 l Water Heater 0.5 liters passed through the engine. After it has passed through the engine connect the coolant (or sea QL 40/60 l Water Heater 0.8 liters...
-
Page 5: Problems And Solutions
English Problems and solutions WARNING! Before removing black plastic • Should water boil despite the high temperature cap, be sure to turn off the electrical supply. cut out safety device immediately cut out the power supply, carefully open hot water taps to let out any excess pressure and change the When the engine does not heat the water: thermostat. -
Page 6: Maintenance
WARNING! All QL water heaters are heat • Cut off the water supply to the water heater. insulated with auto-extinguishable cellular poly- •... - Page 7 41103506-6 Magnetic scale remover Spare parts Please note that valves marked recommended is 41103507-4 2 x 1/2" x 16 mm hose fitting kit not included in the QL Water Heater kit. 41103508-2 800W/220V Heating element 41103509-0 Thermostat 41103510-8 Safety valve...
- Page 8 English Adjustable thermostatic mixing valve Thank you for having chosen our adjustable thermostatic mixing valve. This kit permits the mixing valve to be easily mounted onto all QL Water heaters. The kit contains: Thermostatic mixing valve with ½" feminine fittings Flexible stainless steel tube ½"...