Advertisement
Quick Links
Advertisement
Related Manuals for Naxa NDC-401
Summary of Contents for Naxa NDC-401
-
Page 2: Table Of Contents
Contents Function Description Notice for Use System Requirements Basic operation ArcSof MediaImpression Product Specifications Standard accessories... -
Page 3: Function Description
Function Description: Welcome! Thank you for purchasing the digital camera. With this digital video camera, you can take 640 x 480 resolution (VGA format) videos and 300,000 pixels of still photos. With the playback function you can play back the taken video or photos with this digital video camera. - Page 4 5. When storing documents onto the memory or the memory card, make sure that the size of the documents does not exceed the capacity of the memory. Maintenance and care: 1. To clean the lens, blow away the dust on its surface, then use proper cloth or tissue for optical devices to clean the lens.
-
Page 5: System Requirements
System requirements: Below are the minimum requirements that your computer needs to operate files for the software included: Operation System Microsoft Windows 2000,XP, Vista,7 Above Intel PIII667 or CPU of equal performance Memory Above 128 MB Sound card and display card DirectX8 or above CD-ROM 4×... - Page 6 Power Key USB Connector TV Out Port Microphone Resolution Switch Lens LED Light USB Switch Speaker Card Slot Battery Cover Strap Holder Tripod...
- Page 7 Shutter/Record Up(+) Key Mode Delete Key Left Key Right Key Down(-) key...
-
Page 8: Basic Operation
2. Basic operation 2.1 Battery Installation Slide down the Battery Cover and insert two new AA alkaline batteries. Align with correct polarity of battery terminals. Close Battery Cover. 2.2 Use SD card Insert the SD memory card into the SD card slot. Push it down until the card stays latched. - Page 9 automatically. In power-on state, when battery level is very low, the red icon on the bottom left of the screen will flash and the camera will turn off after one second. You must replace the batteries. Change mode After powering on, the camera will always enter video record mode, press mode key to change mode between video record and capture.
- Page 10 In playback mode, press Shutter key to start or stop video. Take a Picture In capture mode, press the shutter key to take a photo. Play back videos and photos In playback mode, press left or right key ( ) to select a file. Press Shutter key to begin/stop play video, and press up key or down key to on a photo.
-
Page 11: Arcsof Mediaimpression
port of the other terminal should be connected to VIDEO IN port of TV，red (or white) port of the other terminal should be connected to AUDIO IN port of TV. 2.10 Delete files Press the delete key once to display “Delete File?” Press the delete key again to carry out deletion. - Page 12 ▲ Open USB port ▲Connect camera to PC (1) Connect camera to PC (2) ▲...
-
Page 13: Product Specifications
specifications: Image sensor 300,000pixels Function mode Record, playback, mobile disk, deletion Lens F2.4 f=3.6mm Focus range 120cm~infinity Digital focusing 4× Shutter Electronic LCD display 2.0 inch TFT Display Resolution VGA 640×480, QVGA 320×240 White balance Automatic Exposure Automatic File format Video out TV out Storage media... -
Page 14: Standard Accessories
Standard accessories: Installation CD User manual TV cable...