Wear Your Headset; Use With The Audio Cable - Philips SHB9150 User Manual

Other headset indicator status
Headset status
The headset is connected
to a Bluetooth device, while
the headset in standby
mode or while you are
listening to music.
The headset is ready for
pairing.
The headset is on but not
connected to a Bluetooth
device.
There is an incoming call.
Low battery.
Battery is fully charged.

Wear your headset

Adjust the headband for the best fit.
Tip
•
After use, twist both earshells, fold the headset flat for
storage.
Indicator
Blue LED flashes
for every 8
seconds.
LED flashes
blue and white
alternately.
Blue LED flashes
quickly.
Blue LED flashes
once per second.
White LED
flashes.
White LED is off.

Use with the audio cable

Note
•
Make sure that you turn off the Bluetooth headset
before connecting the audio cable.
With the supplied audio cable, you can use
the headset with non-Bluetooth devices or on
airplane. No battery power is required for the
headset when you use it with the audio cable.
Connect the supplied audio cable to
• the headset and;
• an external audio device.
EN 7