Accesso Ries!O Ptio Nal Accessory :Ii.:i. ;,!:, I;:-: :If - Panasonic VIERA TC-P42S2 Operating Instructions Manual

_I11_] [h'_ _ I_
8
Accessories/OptionalAccessory
d Check you have all the items shown.
[] Remote Control
Transmitter
® N2QAYB000485
[] Batteries for the
Remote Control
Transmitter (2)
¢ AA Battery
[] Pedestal
® TBLX0134 (TC-P42S2)
® TBLX0135 (TC-P46S2,
[] Operating Instructions TC-P50S2)
[] VIERA Concierge and Quick start guide
[] Product Registration Card (U.S.A.)
[] AC cord
® TBLX0157 (TC-P54S2)
How to assemble (p. 9)
_ptional Accessory
Wall-hanging bracket
(angle)
@ TY-WK4P1RW (for 42"/46"150")
TY-WK5P1RW (for 54")
Please contact your nearest Panasonic dealer to purchase the recommended
wall-hanging bracket. For additional details, please refer to the wall-hanging
bracket installation manual.
a: 15.7" (400 mm) (42"/46"/50")
19.7" (500 mm) (54")
b: 11.8" (300 mm) bracket installation
@ In order to maintain the TV's performance and safety, be absolutely sure to ask your dealer or a licenced
contractor to secure the wall-hanging brackets.
@ Carefully read the instructions accompanying optional accessories, and be absolutely sure to take steps to
prevent the TV from tipping over.
@ Handle the TV carefully during installation since subjecting it to impact or other forces may cause product damage.
@ Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or pipes in the
wall before hanging bracket.
@ When using the angled-type wall hanging bracket, please ensure that there is sufficient space for the connecting
cables not to press against the wall when the TV is tilted forward.
@ For safety reasons, remove units no longer being used from their wall-mounted locations.
Open
Hook
Close
Note the correct polarity
(+ or-).
Caution
@ Incorrect installation may cause
battery leakage and corrosion,
resulting in damage to the remote
control.
® Do not mix old and new batteries.
® Do not mix different battery types (such
as alkaline and manganese batteries).
® Do not use rechargeable (Ni-Cd)
batteries.
@ Do not burn or break batteries.
==Assembling the pedestal
@ Fix securely with assembly screws ._._. (Total 4 screws
@ Tighten screws firmly.
P°le
:_Pole
Front
Base
(Image: TBLX0135)
==Set-up
@ Carry out work on a horizontal and level surface.
@ Tighten screws firmly.
Arrow
mark
Bottom vmw
Rear side
Hole for pedestal
installation
Pole
(Image: TC-P50S2)
@ Fix securely with assembly
screws ,@_.(Total 4 screws)
f ...............................................................................................................................................
Accessories
Assembly screws
(4 of each)
×YN5+F18FN(for42"/46"/50")
M5 x 18 (Silver)
XYN5+F25FN (for 54")
M5 x 25 (Silver)
\B)'
THEL078N (for 42")
THEL080N (for 46"/50")
THEL073N (for 54")
M5 x 30 (Black)
Poles (2)
@ @ or _,_ is printed at the
bottom of the poles.
Do not disassemble or modify the pedestal.
@ Otherwise the TV may fall over and become damaged, and personal injury may result.
( Caution
Do not use any other TV and displays.
@ Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
¢ If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic
Dealer immediately.
During set-up, make sure that all screws are securely tightened.
@ If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong
enough to support the TV, and it might fall over and become damaged, and personal injury may result.
@
3>
o
o
Co
Co
o
Co
©
o
-3
3>
o
o
o
9